SKF Linear Ball Bearing LBCR 8-2LS

  • RS-stocknr. 423-2251
  • Fabrikantnummer LBCR 8-2LS
  • Fabrikant SKF
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

LBCR Ball Bushings - Closed

Conforms to Series 3 of ISO10285
Comprises a cage, in which the balls are guided, along with the raceway segments and integral seals
High dynamic and static load-carrying capacity
Can be mounted in closed or adjustable, slotted housings

//media.rs-online.com/t_line/LD284969-01.gif

SKF Linear Ball Bushings & Sets

Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.

Specificaties
Kenmerk Waarde
Linear Ball Bearing Type Closed
Seals Without Seals
Inside Diameter 8mm
Outside Diameter 16mm
Length 25mm
Dynamic Load Rating 490N
Static Load Rating 355N
16 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
12 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
42,07
(excl. BTW)
50,90
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 42,07
5 - 9
€ 40,39
10 +
€ 39,55
Related Products
The Super-Linear Bushing has a built-in inertial error ...
Description:
The Super-Linear Bushing has a built-in inertial error compensator, that compensates for the angle between the housing and shaft up to 0.5 degrees tilt without reducing the capacity due to angular pressure. Possible causes for internal errors include shaft flex ...
The standard linear bushing is extremely robust thanks ...
Description:
The standard linear bushing is extremely robust thanks to its steel ball retainer and designed for applications with a high level of soiling, such as woodworking. Standard linear bushings without seals are available for use at very high temperatures. The ...
Linear bearings and linear bearing and housing units ...
Description:
Linear bearings and linear bearing and housing units are available in the compact, light, heavy duty, machined and plain bearing range. The bearings can support high loads while having a relatively low mass and allow the construction of linear guidance ...
Standard SKF linear bearings can be used to ...
Description:
Standard SKF linear bearings can be used to construct linear guidance systems over a wide variety of applications. These bearings are manufactured to ISO 10285 standards. SKF linear ball bearings have the advantage of being corrosion resistant due to a ...