SKF Linear Ball Bearing LBHT 20 A-2LS

  • RS-stocknr. 423-2330
  • Fabrikantnummer LBHT 20 A-2LS
  • Fabrikant SKF
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

LBCT/LBHT Ball Bushings - Open

Radial and axial lip seals protect against bearing contamination
High dynamic and static load-carrying capacity
Dimensions series 3 of ISO10285
Increased shaft support
Must be located in axial direction

//media.rs-online.com/t_line/L423231-01.gif

SKF Linear Ball Bushings & Sets

Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.

Specificaties
Kenmerk Waarde
Linear Ball Bearing Type Open
Seals Without Seals
Inside Diameter 20mm
Outside Diameter 32mm
Length 45mm
Dynamic Load Rating 2650N
Static Load Rating 2650N
11 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
83,63
(excl. BTW)
101,19
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 83,63
5 - 9
€ 80,29
10 +
€ 78,61
Related Products
For long guides requiring shaft support and a ...
Description:
For long guides requiring shaft support and a high level of rigidity. Lightweight precision housing (Aluminium)Super Linear Bushing A with self-alignment featureSecured by grooved taper pinExternal sealsRelubricatable.
The Compact Linear Bushing is distinguished by its ...
Description:
The Compact Linear Bushing is distinguished by its compact dimensions. Through the use of integrated metal locking rings, this type eliminates the need for the otherwise typical axial fasteners in the mounting hole. Also available in corrosion-resistant format. Low cost ...
The Super-Linear Bushing has a built-in inertial error ...
Description:
The Super-Linear Bushing has a built-in inertial error compensator, that compensates for the angle between the housing and shaft up to 0.5 degrees tilt without reducing the capacity due to angular pressure. Possible causes for internal errors include shaft flex ...
Share the same dimensions as LBBR ball bushingsPolyacetal ...
Description:
Share the same dimensions as LBBR ball bushingsPolyacetal with specific polyethylene bearing surfacesLow-maintenance. Good emergency running properties and low “stick”Resistant to heavy static stress and insensitive to shocksInitial lubrication necessary, even if dry running is required later.