SKF Closed Linear Plain Bearing, LPAR 25

  • RS-stocknr. 308-0970
  • Fabrikantnummer LPAR 25
  • Fabrikant SKF
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

LPAR Plain Bushings - Closed

LPAR Plain Bushings share the same dimensions as LBCR linear ball bushings and the same technical features of the LPBR linear plain bearings
LPAR bushings can be fastened and secured in the same way as linear ball bearings, but require additional fixing with circlips
All LPAR variants can be re-lubricated

//media.rs-online.com/t_line/LD308093-01.gif

SKF Plain Bushings

Specificaties
Kenmerk Waarde
Linear Plain Bearing Type Plain
Configuration Closed
Inside Diameter 25mm
Outside Diameter 40mm
Length 58mm
Dynamic Load Rating 4000N
Static Load Rating 14000N
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
58,88
(excl. BTW)
71,24
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 58,88
5 - 9
€ 56,52
10 +
€ 55,35
Related Products
Closed ball bushings and plain bearings for XY ...
Description:
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that ...
Standard Design,In some applications it may be necessary ...
Description:
Standard Design,In some applications it may be necessary to replace the bearing liner only. Replacement liners are simply pushed into the aluminium housings.
’Frelon’ liner resists most chemicals and withstands vibration ...
Description:
’Frelon’ liner resists most chemicals and withstands vibration and shock. Operating temperature range is -240 to +260°C. Suitable for rotary motion. Silent, self-lubricating operation. Maximum Speed Dry: 91.4 m/minMaximum Speed Lubricated: 251.4 m/minMaximum PV Product: 430 m/min x kg/cm².
Share the same dimensions as LBBR ball bushingsPolyacetal ...
Description:
Share the same dimensions as LBBR ball bushingsPolyacetal with specific polyethylene bearing surfacesLow-maintenance. Good emergency running properties and low “stick”Resistant to heavy static stress and insensitive to shocksInitial lubrication necessary, even if dry running is required later.