Igus Split Linear Plain Bearing, TJUM-01-16

  • RS-stocknr. 311-3569
  • Fabrikantnummer TJUM-01-16
  • Fabrikant Igus
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Split Bushing - Closed

Standard Design,In some applications it may be necessary to replace the bearing liner only. The split bushings eliminate the need to remove shafting from the application. It is quick and easy to remove a liner and assemble a new one.

//media.rs-online.com/t_line/L311346-01.gif
//media.rs-online.com/t_line/L311346-24.gif

Self-Lubricating Bushes - Drylin™

Drylin™ bearings are manufactured from high performance polymers. They run without lubrication and require no maintenance. They consist of a polymer liner located in an aluminium housing. Both standard and self-compensating styles are available in closed and split configurations. Features include very low friction, suitability for high speed and acceleration use, high load bearing capacity and self-wiping design. The bearings run on aluminium, steel and ceramic shafts.

Specificaties
Kenmerk Waarde
Linear Plain Bearing Type Plain
Configuration Split
Inside Diameter 16mm
Outside Diameter 26mm
Length 36mm
Dynamic Load Rating 1440N
Static Load Rating 10080N
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
28,68
(excl. BTW)
34,70
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 28,68
5 - 9
€ 27,81
10 +
€ 26,91
Related Products
Closed housing design for use with LBCR linear ...
Description:
Closed housing design for use with LBCR linear ball bearing and LPAR linear plain bearings. Integral grease nipple.
’Frelon’ liner resists most chemicals and withstands vibration ...
Description:
’Frelon’ liner resists most chemicals and withstands vibration and shock. Operating temperature range is -240 to +260°C. Suitable for rotary motion. Silent, self-lubricating operation.
Aluminium housing (8 and 10mm ID), anodised aluminium ...
Description:
Aluminium housing (8 and 10mm ID), anodised aluminium housing 12mm - 30mmLiner JUM-01 as standardRecommended tolerance for shaft: h6 - h10.
Aluminium housings (8 and 10mm ID), anodised aluminium ...
Description:
Aluminium housings (8 and 10mm ID), anodised aluminium housings 12+mmLiner JUM-01 as standardRecommended tolerance for shaft: h6 - h10.