Igus Closed Linear Plain Bearing, RJUM-01-30

  • RS-stocknr. 617-4630
  • Fabrikantnummer RJUM-01-30
  • Fabrikant Igus
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Closed Bushing

Standard Design,In some applications it may be necessary to replace the bearing liner only. Replacement liners are simply pushed into the aluminium housings.

//media.rs-online.com/t_line/L311346-24.gif

Self-Lubricating Bushes - Drylin™

Drylin™ bearings are manufactured from high performance polymers. They run without lubrication and require no maintenance. They consist of a polymer liner located in an aluminium housing. Both standard and self-compensating styles are available in closed and split configurations. Features include very low friction, suitability for high speed and acceleration use, high load bearing capacity and self-wiping design. The bearings run on aluminium, steel and ceramic shafts.

Specificaties
Kenmerk Waarde
Linear Plain Bearing Type Plain
Configuration Closed
Inside Diameter 30mm
Outside Diameter 47mm
Length 68mm
Dynamic Load Rating 5100N
Static Load Rating 35700N
11 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
29,29
(excl. BTW)
35,44
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 29,29
5 - 9
€ 28,39
10 +
€ 27,47
Related Products
Linear bearings and linear bearing and housing units ...
Description:
Linear bearings and linear bearing and housing units are available in the compact, light, heavy duty, machined and plain bearing range. The bearings can support high loads while having a relatively low mass and allow the construction of linear guidance ...
’Frelon’ liner resists most chemicals and withstands vibration ...
Description:
’Frelon’ liner resists most chemicals and withstands vibration and shock. Operating temperature range is -240 to +260°C. Suitable for rotary motion. Silent, self-lubricating operation.
Share the same dimensions as LBBR ball bushingsPolyacetal ...
Description:
Share the same dimensions as LBBR ball bushingsPolyacetal with specific polyethylene bearing surfacesLow-maintenance. Good emergency running properties and low “stick”Resistant to heavy static stress and insensitive to shocksInitial lubrication necessary, even if dry running is required later.
Self Compensating,Uses a spherical area on the outer ...
Description:
Self Compensating,Uses a spherical area on the outer casing for self adjustment. Reductions in the load bearing capacity due to the self-adjusting function are thus avoided, because the shaft is always supported on the entire projected surface. Replacement liners are ...