Termination Regulator for DDR, 1A, MSOP8

  • RS-stocknr. 171-7004
  • Fabrikantnummer BD3539FVM-TR
  • Fabrikant ROHM
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

BD3539FVM is a termination regulator that complies with DDR1-SDRAM, DDR2-SDRAM, and DDR3-SDRAM. This linear power supply uses a built-in N-channel MOSFET and high-speed OP-AMPS specially designed to provide excellent transient response. It has a sink/source current capability of up to 1A and has a power supply bias requirement of 3.3 V (for DDR2 and DDR3) and 5.0 V (for DDR1, DDR2, and DDR3) for driving the N-channel MOSFET. By employing an independent reference voltage input (VDDQ) and a feedback pin (VTTS), this termination regulator provides excellent output voltage accuracy and load regulation.

Incorporates a Push-Pull Power Supply for Termination (VTT)Incorporates a Reference Voltage Circuit (VREF)Incorporates an EnablerIncorporates an Under Voltage Lockout (UVLO)Incorporates a Thermal Shutdown Protector (TSD)

Op voorraad - levertijd 4 à 5 werkdagen.
Prijs Each (In a Pack of 5)
2,274
(excl. BTW)
2,752
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 95
€ 2,274
€ 11,37
100 - 245
€ 2,05
€ 10,25
250 - 495
€ 1,864
€ 9,32
500 - 995
€ 1,708
€ 8,54
1000 +
€ 1,576
€ 7,88
*prijsindicatie
Verpakkingsopties
Related Products
The Microchip Technology MIC5355 series low dropout, dual ...
Description:
The Microchip Technology MIC5355 series low dropout, dual and micropower CMOS linear regulator has an electric rating of 2.5V and 5.5V with 500mA output current. It is an 8-pin surface mount, thermally enhanced MSOP package. This device acts as a ...
ROHM's LDO regulators continue the trend towards increasing ...
Description:
ROHM's LDO regulators continue the trend towards increasing miniaturization and greater power efficiency and are optimized for power supplies of all types. The broad lineup includes low saturation fixed output types in 1A/2A/0.3A ratings, models with different output voltages and ...
BDJ2FA1FP3 is an LDO regulator with output current ...
Description:
BDJ2FA1FP3 is an LDO regulator with output current capability of 0.1A. The output voltage is 12.0V with ±1% accuracy. The SOT89-3K package is most suitable for heat dissipation. As protective function to prevent IC from destruction, this chip has built-in ...
Designed specifically for bus termination in DDR and ...
Description:
Designed specifically for bus termination in DDR and QDR memory applications. These sink/source tracking termination regulators are aimed for space saving, low-cost applications with low external part counts.