Tedea Huntleigh Compression Load Cell 2kg, 15V dc, IP66

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Model 1006 is a very low capacity, high precision single-point load cell designed for direct mounting in low capacity scales. This load cell is suitable for applications including postal scales, counting scales, general-purpose weighing scales and is also suitable for a wide variety of force measurement applications, such as industrial process control or specialist medical devices. Model 1006 offers very high performance from a very small size. It is very easy to use, and easy to apply in a wide variety of applications, where the acting center of force application is within 100 mm of the load cell vertical axis.

Capacities 2–5 kg
Aluminium construction
Single-point 200 x 200 mm platform

Applications
Bench scales
Counting scales
Grocery scales

Specificaties
Kenmerk Waarde
Force Measured Compression
Force/ Load Measurement Range 2kg
Maximum Excitation Voltage 15V dc
Output At Rated Load 2mV/V
Housing Material Aluminium
IP Rating IP66
Terminal Type Cable
Overall Height 22mm
Overall Width 70mm
Overall Depth 15mm
Minimum Operating Temperature -20 (Safe) °C, -10 (Compensated) °C
Maximum Operating Temperature +40 (Compensated) °C, +70 (Safe) °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 08-10-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
54,65
(excl. BTW)
66,13
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 54,65
Related Products
The Siemens Siwarex range of load cells offer ...
Description:
The Siemens Siwarex range of load cells offer a wide selection of different designs suitable for nearly all applications in industrial weighing. The load cells cover a large range of nominal loads, with additional mounting units and accessories available to ...
The Siemens Siwarex range of load cells offer ...
Description:
The Siemens Siwarex range of load cells offer a wide selection of different designs suitable for nearly all applications in industrial weighing. The load cells cover a large range of nominal loads, with additional mounting units and accessories available to ...
A single point, 20kg load cell designed for ...
Description:
A single point, 20kg load cell designed for use in high speed check weighers/fillers or applications under continuous shock and vibration conditions. Output impendence 350ΩSafe overload 150% rated capacityUltimate overload 300% rated capacity.
Low profile, welded stainless steel cells hermetically sealed ...
Description:
Low profile, welded stainless steel cells hermetically sealed to IP67 for use in harsh environments. Compensated Temperature Range -10 to +40°COutput Impedance 350 +/- 3ΩTermination Type: CableUltimate Overload: 300% of Rated Load.