Tedea Huntleigh Compression & Tension Load Cell 500kg, 15V dc, IP67

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CN
Productomschrijving

Tedea Huntleigh Compression & Tension Load Cell "S" Beam Type 200/300kg

Features and Benefits:

Output impendence 350Ω
Input Impedance 400 ±20Ω
Safe overload 150% rated capacity
Ultimate overload 300% rated capacity
For use in tension and compression
6 wire (sense) circuit
Bridge signal conditioners available separately
For Output signal conditioners see (stock no. 455-5043)
Dimensions 62 x 80 x 18mm
The additional sense wires compensate for changes in lead resistance due to temperature changes and/or cable extension.

Typical Applications:

Force measurement,
material testing machines,
conversion of mechanical scales to electronic,
hanging scales, hoppers

FAQs:

What thread does it have?
This is 1/2 Inch UNF

//media.rs-online.com/t_line/LD206029-04.gif
//media.rs-online.com/t_line/LI206029-03.gif
Specificaties
Kenmerk Waarde
Force Measured Compression, Tension
Force/ Load Measurement Range 500kg
Maximum Excitation Voltage 15V dc
Output At Rated Load 2mV/V
Housing Material Stainless Steel
IP Rating IP67
Terminal Type Wire Lead
Overall Height 80mm
Overall Width 62.1mm
Overall Depth 26mm
Minimum Operating Temperature -10°C
Maximum Operating Temperature +40°C
Sensor Type Single Point
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
17 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
202,85
(excl. BTW)
245,45
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 202,85
Related Products
1250 series high capacity single point load cell ...
Description:
1250 series high capacity single point load cell designed for direct mounting of large platforms. Has a humidity-resistant protective coating, assuring long term stability over the compensated temperature range.
The Honeywell FSS-SMT series low profile force sensors ...
Description:
The Honeywell FSS-SMT series low profile force sensors is one of the most reliable force sensors. It is featured with precise and reliable force sensing performance in a compact commercial-grade package. The piezo resistive micro machined silicon sensing element is ...
The Arcol Ohmite FSR series touch screen sensor ...
Description:
The Arcol Ohmite FSR series touch screen sensor which works on force sensing principle featured with the unique characteristic of dynamic resistance related to the amount of applied force. It is intended for applications where a delta in applied force ...
A single point, 20kg load cell designed for ...
Description:
A single point, 20kg load cell designed for use in high speed check weighers/fillers or applications under continuous shock and vibration conditions. Output impendence 350ΩSafe overload 150% rated capacityUltimate overload 300% rated capacity.