Tedea Huntleigh Compression Load Cell 250kg, 15V dc, IP68

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Cantilever - Stainless Steel

Compensated Temperature Range -10 to +40°C
Output Impedance 350 +/- 3Ω
Termination Type: Cable
Ultimate Overload: 300% of Rated Load

Low profile, welded stainless steel cells hermetically sealed to IP67 for use in harsh environments.

Suitable for platform scales, hopper and tank weighing, general process weighing, test rigs and general force measurements
Mounting via 3 x 8mm holes
Connection via 3m 6-core screened cable
Dimensions 120 x 32mm dia.

//media.rs-online.com/t_line/L202030-01.gif
//media.rs-online.com/t_line/LD202030-01.gif
Specificaties
Kenmerk Waarde
Force Measured Compression
Force/ Load Measurement Range 250kg
Maximum Excitation Voltage 15V dc
Output At Rated Load 2mV/V
Housing Material Stainless Steel
IP Rating IP68
Terminal Type Wire Lead
Overall Width 120mm
Minimum Operating Temperature -10°C
Maximum Operating Temperature +40°C
Sensor Type Low Profile
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
381,40
(excl. BTW)
461,49
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 381,40
Related Products
A single point, 20kg load cell designed for ...
Description:
A single point, 20kg load cell designed for use in high speed check weighers/fillers or applications under continuous shock and vibration conditions. Output impendence 350ΩSafe overload 150% rated capacityUltimate overload 300% rated capacity.
Low capacity, high precision, aluminium, single point load ...
Description:
Low capacity, high precision, aluminium, single point load cell. A special humidity-resistant protective coating ensures long-term reliability. Output impendence 350ΩSafe overload 150% rated capacityUltimate overload 250% rated capacityCable type 4 Wire; 28 AWG; Spiral Shield; PVC Jacket.
Output impendence 350ΩInput Impedance 400 ±20ΩSafe overload 150% ...
Description:
Output impendence 350ΩInput Impedance 400 ±20ΩSafe overload 150% rated capacityUltimate overload 300% rated capacityFor use in tension and compression6 wire (sense) circuitBridge signal conditioners available separatelyFor Output signal conditioners see (stock no. 455-5043)Dimensions 62 x 80 x 18mm The additional ...
1042 series low profile single point load cell ...
Description:
1042 series low profile single point load cell designed for direct mounting of low cost weighing platforms. Has a humidity resistant protective coating, which assures long term stability over the entire compensated temperature range. Compensated Temperature Range -10 to +40°COutput ...