Tedea Huntleigh Compression & Tension Load Cell 300kg, 15V dc, IP67

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CN
Productomschrijving

Tedea Huntleigh Compression & Tension Load Cell "S" Beam Type 200/300kg

Features and Benefits:

Output impendence 350Ω
Input Impedance 400 ±20Ω
Safe overload 150% rated capacity
Ultimate overload 300% rated capacity
For use in tension and compression
6 wire (sense) circuit
Bridge signal conditioners available separately
For Output signal conditioners see (stock no. 455-5043)
Dimensions 62 x 80 x 18mm
The additional sense wires compensate for changes in lead resistance due to temperature changes and/or cable extension.

Typical Applications:

Force measurement,
material testing machines,
conversion of mechanical scales to electronic,
hanging scales, hoppers

FAQs:

What thread does it have?
This is 1/2 Inch UNF

Specificaties
Kenmerk Waarde
Force Measured Compression, Tension
Force/ Load Measurement Range 300kg
Maximum Excitation Voltage 15V dc
Output At Rated Load 2mV/V
Housing Material Nickel Plated Alloy Steel
IP Rating IP67
Terminal Type Wire Lead
Overall Height 80mm
Overall Width 62.1mm
Overall Depth 26mm
Minimum Operating Temperature -10°C
Maximum Operating Temperature +40°C
Sensor Type S Type
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
18 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
248,11
(excl. BTW)
300,21
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 248,11
Related Products
A single point, 20kg load cell designed for ...
Description:
A single point, 20kg load cell designed for use in high speed check weighers/fillers or applications under continuous shock and vibration conditions. Output impendence 350ΩSafe overload 150% rated capacityUltimate overload 300% rated capacity.
Low profile, welded stainless steel cells hermetically sealed ...
Description:
Low profile, welded stainless steel cells hermetically sealed to IP67 for use in harsh environments. Compensated Temperature Range -10 to +40°COutput Impedance 350 +/- 3ΩTermination Type: CableUltimate Overload: 300% of Rated Load.
Low capacity, high precision, aluminium, single point load ...
Description:
Low capacity, high precision, aluminium, single point load cell. A special humidity-resistant protective coating ensures long-term reliability. Output impendence 350ΩSafe overload 150% rated capacityUltimate overload 250% rated capacityCable type 4 Wire; 28 AWG; Spiral Shield; PVC Jacket.
1042 series low profile single point load cell ...
Description:
1042 series low profile single point load cell designed for direct mounting of low cost weighing platforms. Has a humidity resistant protective coating, which assures long term stability over the entire compensated temperature range. Compensated Temperature Range -10 to +40°COutput ...