Aerotight, M12, 19mm Plain Aerotight Lock Nut

  • RS-stocknr. 260-6436
  • Fabrikantnummer A2AEROTIGHTM12RS
  • Fabrikant Aerotight
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

A1 Stainless Steel - Metric

A1 grade type 303 stainless steel
All-metal construction
Allows use up to 300°C
Stay in position whether tightened or not
Reuseable

Aerotight® Stiff Nuts

Self-locking all metal nuts, designed to stay in position despite conditions of severe vibration. This is achieved by cantilevered threaded arms which are deflected downwards and inwards.

Note

Two complete threads of the engaged screw must protrude beyond the nut.
Aerotight® nuts should not be used on damaged or interrupted threads.

Specificaties
Kenmerk Waarde
Thread Size M12
Type Aerotight
Width 19mm
Finish Plain
1 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Box of 10
48,25
(excl. BTW)
58,38
(incl. BTW)
Box(es)
Per doos
Per stuk*
1 - 4
€ 48,25
€ 4,825
5 - 9
€ 45,83
€ 4,583
10 - 29
€ 43,42
€ 4,342
30 +
€ 40,53
€ 4,053
*prijsindicatie
Related Products
Self-locking all metal nuts, designed to stay in ...
Description:
Self-locking all metal nuts, designed to stay in position despite conditions of severe vibration. This is achieved by cantilevered threaded arms which are deflected downwards and inwards. Grade 4 steel, bright zinc platedAll-metal constructionAllows use up to 300°CStay in position ...
Self-locking nuts with glass-filled nylon inserts. These are ...
Description:
Self-locking nuts with glass-filled nylon inserts. These are designed to remain secure despite conditions of severe vibration. Self locking nuts, metric threadTo DIN985A4 grade 18/8 stainless steel (Type 316 S16).
RS Pro self locking aerotight nut has a ...
Description:
RS Pro self locking aerotight nut has a type 316, A4 grade stainless steel construction for corrosion resistance. All metal constructionSuitable for use up to 300°CStays in position whether tightened or notSuitable for use in highly corrosive environmentsReuseable.
Quick release nuts for all angle grinders with ...
Description:
Quick release nuts for all angle grinders with metric M14 threadsDisc must be centred on the supporting flange, not on the nutRequired thread length more than 6 mm.