Megger LRCD220-FR Loop Impedance & RCD Combined Tester, Loop Impedance Test Type 2 Wire 500V

  • RS-stocknr. 537-7923
  • Fabrikantnummer LRCD220-FR
  • Fabrikant Megger
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

LRCD200 Loop Tester

Single-phase 3-wire non-DDR trip loop tester.
Differential circuit breaker testing 10 mA → 1000 mA.
Ramp testing to verify the DDR trip limit.
Extremely easy and safe to use.
Integrated protective front cover.
Tough rubber armoured case.
IP54 sealed.
The LRCD200 is ideal for electricians working on 230 V low-voltage networks in accordance with NFC15.100.
Auto differential circuit breaker testing (LRCD 200).
110 V loop testing, 2-wire fast testing, plus phase-phase and phase-earth measurements (LRCD220).

Specificaties
Kenmerk Waarde
Loop Impedance Test Type 2 Wire
Maximum Voltage Measurement 500V
RCD Test Type AC Selective, DC Selective
PSC Display Yes
Best Loop Test Accuracy ±2%
RCD Test Current 10 mA, 30 mA, 100 mA, 300 mA, 500 mA, 1000 mA
Non-Trip Loop Test Yes
Safety Category CAT III 300 V, IEC 61010
Display Type LCD
Battery Life 2000 Tests
Battery Type AA
Power Source Battery
Dimensions 203 x 148 x 78mm
Weight 980g
Safety Category Level CAT III
Width 148mm
Safety Category Voltage 300V
Length 203mm
Minimum Operating Temperature -5°C
Maximum Operating Temperature +40°C
Model Number p LRCD220
Height 203mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 22-11-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
822,00
(excl. BTW)
994,62
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 822,00
Related Products
All instruments meet IEC1010, HD384 and BSEN61557, and ...
Description:
All instruments meet IEC1010, HD384 and BSEN61557, and are sealed to IP54 for weatherproof performance.Easy to hold and comfortable to use, the large display provides the unique combination of two digital readouts and an analogue arc.All primary results are displayed ...
Fluke 1650 series testers verify the safety of ...
Description:
Fluke 1650 series testers verify the safety of electrical installations in domestic, commercial and industrial applications.They allow electrical wiring to be certified to the new standard NF C 1500.These devices combine simplicity, efficiency, ruggedness and ergonomics to represent a new ...
All instruments meet IEC1010, HD384 and BSEN61557, and ...
Description:
All instruments meet IEC1010, HD384 and BSEN61557, and are sealed to IP54 for weatherproof performance.Easy to hold and comfortable to use, the large display provides the unique combination of two digital readouts and an analogue arc.All primary results are displayed ...
MIT480 mk2 Series insulation & continuity testers replace ...
Description:
MIT480 mk2 Series insulation & continuity testers replace the original MIT480 range. Designed for the Telecommunication and Cable testing markets. The tester features a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. Insulation testing up to ...