Megger LTW315-RS-BS Loop Impedance Tester 2 Wire, 3 Wire 440V ±10% CAT IV 300 V, IEC 61010 LTW315 RS Calibration

  • RS-stocknr. 237-861
  • Fabrikantnummer LTW315-RS-BS
  • Fabrikant Megger
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Megger Loop Impedance Tester

The Megger earth loop impedance testers are 2-wire, 440V and ±10% test loop accuracy. This tester is to verify the loop impedance of a live electrical circuit without the need to disconnect the electrical supply. The LTW300 series instruments offer a safe and easy but do not trip 30mA RCDs and can be used on a wide range of voltages. A loop test is performed with only 2 test leads. This can be either phase to earth, phase to neutral and phase to phase.

Supplied with
Test lead set with crocodile clips, mains socket test lead, 8 AA alkaline batteries, hard carry case and instructions.

Features and Benefits

Backlit display
0.01Ω resolution
No-trip loop test on circuits with RCDs of ≥30 mA
3-phase circuits with RCD protection can be tested
Tests radial circuits where the circuit does not return to the origin, even where only a phase and neutral contacts are available.
10second non-trip loop test time with autotest extension up to a further 10seconds
if noise is detected, to improve the accuracy of the test
High current loop testing for supplies that do not have an RCD fitted
AUTO START will start the loop test running as soon as the test leads are connected no need to press the test button means much safer testing
PFC display up to 20kA
Voltage and frequency measurement
110Vac systems including 110V centre tap to earth (55V phase to earth) can be tested on the secondary winding.
Optional 10A fused 2 wired test leads and crocodile clip set

Certifications

EN61557
EN61010-1
EN61010
IEC61010-1 300V CATIV

Specificaties
Kenmerk Waarde
Loop Impedance Test Type 2 Wire, 3 Wire
Calibrated RSCAL
Maximum Voltage Measurement 440V
Best Loop Test Accuracy ±10%
Non-Trip Loop Test Yes
Safety Category CAT IV 300 V, IEC 61010
Display Type LCD
Battery Type AA
Battery Life 2000 Tests
Power Source Battery
Dimensions 203 x 148 x 78mm
Weight 1kg
Height 78mm
Width 148mm
Maximum Operating Temperature +50°C
Model Number p LTW315
Safety Category Voltage 300V
Length 203mm
Safety Category Level CAT IV
Minimum Operating Temperature -10°C
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 13-08-2020, met een levertijd van 1 werkdag.
Prijs Each
640,00
(excl. BTW)
774,40
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 640,00
Related Products
Offering data storage and download capabilities via a ...
Description:
Offering data storage and download capabilities via a USB port, the Fluke 1625-2 can perform 4 types of earth ground measurement. This tester is able to measure ground loop resistance using only clamps, this method doesn't require the use of ...
The PROFITEST MXTRA Starter Pack Kit consists of ...
Description:
The PROFITEST MXTRA Starter Pack Kit consists of the M520P test insrument along with a VARIO plug adapter set, F2000 universal carrying pouch, rechargeable battery pack and battery charger. Loop and line impedance measurement Measurement of insulation resistance using nominal ...
The Megger electrical tester is an MFT1800 series ...
Description:
The Megger electrical tester is an MFT1800 series multifunction installation tester designed for testing low voltage of 100V, 250V,500V, 1000V with German mains plug. This advanced model provides the added benefit of type B RCD testing, 3-pole earth electrode testing ...
Fluke 1650 series testers verify the safety of ...
Description:
Fluke 1650 series testers verify the safety of electrical installations in domestic, commercial and industrial applications.They allow electrical wiring to be certified to the new standard NF C 1500.These devices combine simplicity, efficiency, ruggedness and ergonomics to represent a new ...