RS PRO Loop Impedance Tester 3 Wire ±2% IPT1800 UKAS Calibration

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS PRO IPT 1800 Digital PSC and Loop Tester

RS PRO IPT 1800 is a great value, microprocessor-controlled PSC/loop tester. Its high loop impedance range permits direct measurement of ground spikes. Features include an auto lock-out if the test resister overheats.

Features and Benefits:

  • Large 3 digit 2000 count with analog bargraph LCD

  • Microprocessor controlled for highest accuracy and reliability

  • High impedance ranges allow direct measurements of ground spikes

  • Automatic lock heat – added safety if test resistor overheats

  • 200 A, 2000 A & 20 kA PSC ranges

  • 20 Ω, 200 Ω & 2000 Ω loop impedance ranges

  • AC voltage indication

  • Direct reading of Prospective Short Circuit Current (PSC)

  • Over temperature test inhibit with indication

  • Dimensions 180 x 130 x 70 mm

  • Weight 800 g approximately

Typical Applications:

Earth loop impedance testers are used by contractors for testing electrical installations in industrial and commercial applications.

FAQs

What is earth loop impedance testing?

This is also known as loop testing. Earth loop impedance testing is carries out to make sure that if an error occurs in an electrical installation, there is enough current to flow in order to operate the fuse or circuit breaker protecting the faulty circuit within a predetermined time. The purpose is to make sure that the circuit is disconnected quickly in order to prevent overheating and possibly a fire.

What are PSC tests?

Prospective Short Circuit (PSC) tests are designed to calculate the maximum current that will flow within a fault loop path during the event of an electrical fault.

Standards

EN61557 and BS7671 wiring regulations, EN61010-1 300V CAT III

Supplied with

Test Lead with IEC connector (AC cord), external earth probe, neck strap, user manual

RS Pro Loop Testers

Warning

  • When conducting a test, particularly on earth spikes, do not touch any exposed metal work. If the overheat symbol appears in the display disconnect the device from the mains and allow to cool down.
Specificaties
Kenmerk Waarde
Loop Impedance Test Type 3 Wire
Calibrated UKAS
Best Loop Test Accuracy ±2%
Resolution 0.01 Ω
PSC Display Yes
Display Type LCD
Power Source Mains
Dimensions 180 x 130 x 70mm
Weight 800g
Height 70mm
Width 130mm
Minimum Operating Temperature 0°C
Maximum Operating Temperature +40°C
Plug Type Type G - British 3-pin
Model Number p IPT1800
Length 180mm
19 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
242,00
(excl. BTW)
292,82
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 242,00
Related Products
This exclusive 2 piece kit from our trusted ...
Description:
This exclusive 2 piece kit from our trusted and highly reliable RS PRO range includes the RS PRO multifunction electrical tester along with the RS PRO Bluetooth clamp meter. These two devices are essential in order to verify the safety ...
Fluke 1650 series testers verify the safety of ...
Description:
Fluke 1650 series testers verify the safety of electrical installations in domestic, commercial and industrial applications.They allow electrical wiring to be certified to the new standard NF C 1500.These devices combine simplicity, efficiency, ruggedness and ergonomics to represent a new ...
Earth loop impedance testers to verify the loop ...
Description:
Earth loop impedance testers to verify the loop impedance of a live electrical circuit without the need to disconnect the electrical supply. The LTW300 series instruments offer a safe and easy 2 wire loop testing solution that does not trip ...
The Megger LTW425 two wire earth loop tester ...
Description:
The Megger LTW425 two wire earth loop tester verifies the loop impedance of a live electrical circuit, ie without the need to disconnect the electrical supply. Offers a high resolution 2-wire loop testing solution that does not trip 30 mA ...