Megger LT300 Loop Impedance Tester 2 Wire 550V ±5% CAT IV 300 V LT300 RS Calibration

  • RS-stocknr. 536-9219
  • Fabrikantnummer LT300
  • Fabrikant Megger
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

LT300 Loop Tester

The LT300 combines high current-loop testing over a wide range of frequencies and supply voltages with simple operation. This is a HIGH CURRENT ONLY tester, designed for installations where there are no RCDs installed. A two-wire test performs a fast loop impedance measurement at a test current up to 27A, with a resolution of 0.01ohms. Frequency range and operating voltage are wide, allowing for a diverse range of applications up to and including CATIV 550V phase-to-phase. Testing commences automatically as soon as the instrument is connected to the supply. Repeat testing is provided by the TEST button.

High current loop tester
Simple auto start operation
16Hz to 400Hz frequency range
Up to CATIV 300V phase-to-earth (550V phase-to-phase) applications
Optional two-wire lead set available separately, RS stock no. 537-7282

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

durable hard carry case; BS1363 mains socket test lead; 8 x AA alkaline batteries; instructions.

Specificaties
Kenmerk Waarde
Loop Impedance Test Type 2 Wire
Calibrated RSCAL
Maximum Voltage Measurement 550V
Best Loop Test Accuracy ±5%
Resolution 0.1 Ω
Safety Category CAT IV 300 V
Display Type LCD
Battery Type AA
Power Source Battery
Dimensions 203 x 148 x 78mm
Weight 980g
Height 78mm
Maximum Operating Temperature +60°C
Length 203mm
Model Number p LT300
Minimum Test Frequency 16Hz
Plug Type Type G - British 3-pin
Maximum Test Frequency 400Hz
Safety Category Level CAT IV
Minimum Operating Temperature -10°C
Width 148mm
Safety Category Voltage 300V
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 27-08-2020, met een levertijd van 1 werkdag.
Prijs Each
600,00
(excl. BTW)
726,00
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 600,00
Related Products
This exclusive 2 piece kit from our trusted ...
Description:
This exclusive 2 piece kit from our trusted and highly reliable RS PRO range includes the RS PRO multifunction electrical tester along with the RS PRO Bluetooth clamp meter. These two devices are essential in order to verify the safety ...
Fluke 1650 series testers verify the safety of ...
Description:
Fluke 1650 series testers verify the safety of electrical installations in domestic, commercial and industrial applications.They allow electrical wiring to be certified to the new standard NF C 1500.These devices combine simplicity, efficiency, ruggedness and ergonomics to represent a new ...
The UL1430 Hook up wire is used for ...
Description:
The UL1430 Hook up wire is used for internal wiring of electronic and electrical equipment. • 100m lengths• Stranded tinned copper conductor• Various colours• 22, 24, 26, 28AWG• XLPVC Material• UL758, UL1581.
The RS version of this hook up wire ...
Description:
The RS version of this hook up wire can be used for internal wiring of electronic and electrical equipment. Stranded tinned copper conductorVarious coloursPVC insulation18,20,22,24,26,28 AWG.