ROHM BU18SA4WGWL-E2, LDO Regulator, 200mA, 1.8 V, ±0.6% 4-Pin, UCSP50L1

RS-stocknr.:: 171-7551
Fabrikantnummer:: BU18SA4WGWL-E2
Fabrikant:: ROHM

ROHM BU18SA4WGWL-E2, LDO Regulator, 200mA, 1.8 V, ±0.6% 4-Pin, UCSP50L1

Op voorraad - levertijd 3 à 5 werkdagen.

Toegevoegd

Prijs Elk (in een pakket van 50)

€ 0,303

(excl. BTW)

€ 0,367

(incl. BTW)

Aantal stuks	Per stuk	Per pak*
50 - 450	€ 0,303	€ 15,15
500 - 700	€ 0,273	€ 13,65
750 - 1450	€ 0,248	€ 12,40
1500 - 2450	€ 0,227	€ 11,35
2500 +	€ 0,21	€ 10,50
*prijsindicatie

RS-stocknr.:: 171-7551
Fabrikantnummer:: BU18SA4WGWL-E2
Fabrikant:: ROHM

Datasheets

Wetgeving en compliance

Productomschrijving

BUxxSA4 series are high-performance CMOS LDO regulators with output current ability of up to 200-mA. These devices have excellent noise and load response characteristics despite of its low circuit current consumption of 40μA. They are most appropriate for various applications such as power supplies for logic IC, RF, and camera modules.

High Output Voltage Accuracy: ±0.6% (±15mV on VOUT<2.5V)
High Ripple Rejection: 70 dB (Typ, 1 kHz,)
Compatible with small ceramic capacitor (Cin=Cout=0.47 μF)
Low Current Consumption: 40 μA
Output Voltage ON/OFF control
Built-in Over Current Protection Circuit (OCP)
Built-in Thermal Shutdown Circuit (TSD)
Adopting ultra-small WLCSP UCSP50L1

Specificaties

Kenmerk	Waarde
Maximum Output Current	200mA
Output Voltage	1.8 V
Number of Outputs	1
Line Regulation	8 mV
Accuracy	±0.6%
Load Regulation	16 mV
Polarity	Positive
Mounting Type	Surface Mount
Package Type	UCSP50L1
Pin Count	4
Output Type	Fixed
Dimensions	0.8 x 0.8 x 0.45mm
Maximum Operating Temperature	+85 °C
Maximum Input Voltage	5.5 V
Height	0.45mm
Minimum Operating Temperature	-40 °C
Minimum Input Voltage	1.7 V
Length	0.8mm
Width	0.8mm

RS-stocknr.:: 171-7551
Fabrikantnummer:: BU18SA4WGWL-E2
Fabrikant:: ROHM