RS PRO Lubricant PTFE 200 ml Aerosol

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

RS PRO PTFE Dry Film Lubricant

The RS PRO 200ml PTFE dry film lubricant is a white, dry-film product for use where mineral oils or silicones are not suitable. It is also suitable for use as an anti-stick and mould release agent or where products of the highest purity are required. This film will not contaminate, migrate or pick up dust and dirt particles. It consists of inert particles of PTFE in a suspension medium, which can replace conventional silicones and mineral oils in extreme environments. It can be used to lubricate a wide variety of sliding mechanisms including plain bearings, gears, slides, cams and valves.
This product is widely used for fasteners, slides and bearings in electrical/electronic and industrial assemblies.

Warning:
Flammable product

Features and Benefits

Prevents seizure and pick up
Can be used as a chemically protective film and release agent
Shelf life of 48 months

Certifications

ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Package Size 200 ml
Lubricant Type PTFE
Category Dry Film
Food Processing Safe No
Package Type Aerosol
18 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
10,50
(excl. BTW)
12,70
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 10,50
6 - 14
€ 10,09
15 +
€ 9,88
Related Products
Cramolin Kabelglide is an excellent quality lubricant designed ...
Description:
Cramolin Kabelglide is an excellent quality lubricant designed to use when pulling cables and wires through your electric installation tubes. The naphtha-based aerosol lubricant is constant within temperatures of -50°C to +200°C. Attached 70 cm extension tube for accurate workDoes ...
The Rocol 400ml FoodLube dismantling lubricant is a ...
Description:
The Rocol 400ml FoodLube dismantling lubricant is a non-toxic, fast-acting, penetrating spray that provides short-term corrosion protection for corroded threaded fasteners and other seized components. This spray is NSF H1 registered for incidental contact with food making. It is ideal ...
Spray applied, thin lubricating molybdenum disulphide film. Quick ...
Description:
Spray applied, thin lubricating molybdenum disulphide film. Quick drying, resistant to high loads, fluids and oilsIdeal for use as a dry film lubricant particularly in oxygen or vacuum environments, where components may be affected by chemicals, solvents or petroleum based ...
Specially formulated to provide smooth and precise movement ...
Description:
Specially formulated to provide smooth and precise movement and to overcome the "slipstick" phenomenaExtreme pressure agents and anti-wear additives for long lasting lubricationClings to vertical faces and does not fling off rotating partsProtects against corrosion.