Ambersil Lubricant 500 ml FLT Chain Lube Aerosol

  • RS-stocknr. 745-7523
  • Fabrikantnummer 31614-AB
  • Fabrikant Ambersil
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Ambersil Chain Lubricant

The Ambersil 500m FLT chain lubricant aerosol is specifically formulated for use on chains, drives, and tail-lifts in mechanical handling applications. It provides excellent penetration and tenacity that ensures long-lasting lubrication.

Features and Benefits

Good adhesion on metal surfaces, even at elevated temperatures and high rpm
Leaves a tenacious, long-lasting lubricant film
Insoluble in water, soluble in hydrocarbon solvents
Good load carrying properties
Resistant to water wash off
Prevents corrosion
Operating temperature ranges between -15°C and 175°C
Contains PTFE which helps reduce friction and wear
Virtually odourless and colourless
Controlled application with gentle foaming action
Does not contain nut oils or nut oil derivatives
Shelf life of 72 months

Applications

Lubricant for general and food processing industries
Chain drives
Open gears
Wire ropes
Pulleys
Snatch blocks
Rollers
Conveyors
Transfer belts
Forklifts
Bearings
Hoists
Overhead door drivers
Hinges
Sprockets

Certifications

NSF H1 registered

Specificaties
Kenmerk Waarde
Package Size 500 ml
Trade Name FLT Chain Lube
Application Chains
Package Type Aerosol
Food Processing Safe No
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
8,16
(excl. BTW)
9,87
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 8,16
6 - 14
€ 7,84
15 +
€ 7,66
Related Products
Cramolin Kabelglide is an excellent quality lubricant designed ...
Description:
Cramolin Kabelglide is an excellent quality lubricant designed to use when pulling cables and wires through your electric installation tubes. The naphtha-based aerosol lubricant is constant within temperatures of -50°C to +200°C. Attached 70 cm extension tube for accurate workDoes ...
Consists of inert particles of PTFE in a ...
Description:
Consists of inert particles of PTFE in a suspension medium, which can replace conventional silicones and mineral oils in extreme environments. Prevents seizure and pick-upCan be used to lubricate a wide variety of sliding mechanisms including plain bearings, gears, slides, ...
Spray applied, thin lubricating molybdenum disulphide film. Quick ...
Description:
Spray applied, thin lubricating molybdenum disulphide film. Quick drying, resistant to high loads, fluids and oilsIdeal for use as a dry film lubricant particularly in oxygen or vacuum environments, where components may be affected by chemicals, solvents or petroleum based ...
A general purpose medium-duty silicone lubricant supplied in ...
Description:
A general purpose medium-duty silicone lubricant supplied in a large 500ml aerosol can. Inhibits adhesion of inks, dyes and adhesivesExhibits excellent slip properties on blades, tables, chutes and conveyorsSafe on wood, glass, fabrics, metals, rubbers and most plasticsEliminates friction and ...