Texas Instruments SN65LVDS047PW, LVDS Transmitter Quad LVTTL LVDS, 3 → 3.6 V, 16-Pin, TSSOP

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Differential Line Drivers and Receivers (LVDS PHY), Texas Instruments

LVDS Communication

Low Voltage Differential Signaling, or LVDS, is an electrical signaling system that can run at very high speeds over cheap, twisted-pair copper cables.

Applications: Firewire, SATA, SCSI

Specificaties
Kenmerk Waarde
Number of Drivers 4
Input Type LVTTL
Output Type LVDS
Transmission Data Rate 400Mbps
Number of Elements per Chip 4
Mounting Type Surface Mount
Package Type TSSOP
Pin Count 16
Dimensions 5 x 4.4 x 1.15mm
Height 1.15mm
Length 5mm
Maximum Operating Supply Voltage 3.6 V
Minimum Operating Supply Voltage 3 V
Width 4.4mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
25 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
3,76
(excl. BTW)
4,55
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 3,76
10 - 49
€ 3,16
50 - 99
€ 2,88
100 - 249
€ 2,59
250 +
€ 2,43
Verpakkingsopties
Related Products
The Texas Instruments SCANSTA111 extends the IEEE Std. ...
Description:
The Texas Instruments SCANSTA111 extends the IEEE Std. 1149.1 test bus into a multi-drop test bus environment with the advantages of improved test throughput, and the ability to remove a board from the system whilst retaining test access to the ...
Controller Area Network (CAN or CAN-bus) is a ...
Description:
Controller Area Network (CAN or CAN-bus) is a computer network protocol and bus standard designed to allow microcontrollers and devices to communicate with each other without a host computer. It was designed specifically for automotive applications but is now also ...
Texas Instruments DC-to-DC Converter Non-Isolated Step-Down Power Modules ...
Description:
Texas Instruments DC-to-DC Converter Non-Isolated Step-Down Power Modules with adjustable output voltage. Integrated shielded inductorPrecision enable, soft-start, and tracking for sequencingBest-in-class thermal performancePin-to-pin compatible modules for different load currentsEasy-to-use packagingPasses ...
Designed specifically for bus termination in DDR and ...
Description:
Designed specifically for bus termination in DDR and QDR memory applications. These sink/source tracking termination regulators are aimed for space saving, low-cost applications with low external part counts.