Analog Devices LVDT, ±2.5 → ±50.8mm stroke -55°C +95°C

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Evaluation Board for LVDT Signal Conditioning Application

The EVAL-CN0301-SDPZ (803-1706) is an evaluation board from Analog Devices implementing a complete adjustment-free linear variable differential transformer (LVDT) signal conditioning circuit; EVAL-CFTL-LVDT (803-1591) is the LVDT required for use with the evaluation board.
The evaluation board circuit uses the AD698 LVDT Signal Conditioner IC which contains a sine wave oscillator and a power amplifier to generate the required excitation signals that drive the primary side of the LVDT; it also converts the LVDT secondary output into a dc voltage. The circuit produces an I2C compatible digital output via an AD7992 12-bit ADC.

The following ICs are included on the evaluation board:

AD698 Universal LVDT Signal Conditioner
AD8615 Precision CMOS RRIO Op-Amp
AD7992 12-bit ADC with I2C interface

Sensor Interfaces, Analog Devices

Specificaties
Kenmerk Waarde
Stroke ±2.5 → ±50.8mm
Energising Voltage Range 3 Vrms
Sensitivity 94.5 mV/V/mm
Overall Height 44.5mm
Overall Width 19.05 (Dia.)mm
Minimum Operating Temperature -55°C
Maximum Operating Temperature +95°C
5 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
98,15
(excl. BTW)
118,76
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 98,15
Related Products
These devices comprise a movable nickel iron core ...
Description:
These devices comprise a movable nickel iron core and three coils - one for energisation and two for pick-up. They need to be driven by a sine wave to produce an output amplitude and phase directly proportional to the position ...
These devices comprise a movable nickel iron core ...
Description:
These devices comprise a movable nickel iron core and three coils - one for energisation and two for pick-up. They need to be driven by a sine wave to produce an output amplitude and phase directly proportional to the position ...
These devices comprise a movable nickel iron core ...
Description:
These devices comprise a movable nickel iron core and three coils - one for energisation and two for pick-up. They need to be driven by a sine wave to produce an output amplitude and phase directly proportional to the position ...
The optimum series of LVDT sensors are high ...
Description:
The optimum series of LVDT sensors are high performance sensors ideal for use in process control and research applications, the 9.52 mm diameter of these sensors make them an ideal choice where space is limited. Large radial bore clearance9.52 mm ...