Schneider Electric XPSMCWIN Connection Cable, For Use With XPSMC Safety Switch

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

XPS MC, Configurable Safety Controllers, Base Units

Configurable device capable of centralised monitoring of multiple safety functions such as E-stops, safety interlocks, magnetic safety interlocks, two hand controllers, light curtains, zero speed detection, enabling switches. Designed to provide a solution for safety applications requiring conformity to category 4 of standard EN 954-1/ISO 13849-1 and SIL 3 requirements of standard IEC 61508. Incorporates an interface for communicating with operator dialogue terminals (Magelis) or PLCs.

8 control inputs as standard
LEDs on the front face enable simple and visual diagnostics
Communication via Modbus
30 certified safety functions can be assigned to the safety outputs, these are configured using the XPS MCWIN software (see stock no 464-899)
Required safety function can be selected after receipt of the product.

Note

Stock numbers 464-946 and 464-930 are starter kits. These contain the safety controller, XPS-MCWIN configuration software, USB to 8 pin male connector cable, 8 pin female mini DIN to RJ45 cable, sub 25 way male connector to RJ45 cable, cage clamp terminal set and screw clamp terminal set
To connect XPS-MC to a PC for programming and diagnostic purposes:
Laptop PC with 9 pin serial port: use RS 382-2645 and 544-490
Laptop PC with USB port: use RS 464-962 and RS 218-080

Specificaties
Kenmerk Waarde
Accessory Type Connection Cable
For Use With XPSMC Safety Switch
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
466,56
(excl. BTW)
564,54
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 466,56
10 - 14
€ 447,45
15 +
€ 427,91
Related Products
Smallest designActuation only possible with BPS260, available separatelyLeft-hand ...
Description:
Smallest designActuation only possible with BPS260, available separatelyLeft-hand or right-hand side versions for door-mountingControl category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlockingDimensions: L13 x W26 x H36 mm.
The Schmersal 5m angled female connection cable is ...
Description:
The Schmersal 5m angled female connection cable is used with the BNS 260 safety switch. It has an M8 6-pin connector size. Pre-wired cable6-poleLatching interlockingStraight designOperating current is 1.5A.
The M4000 2 and 3 beam devices are ...
Description:
The M4000 2 and 3 beam devices are used for perimeter and access guarding where the hazard is considered high risk, requiring a safety device according to EN954 Category 4. The M4000 is certified according to IEC 61508 SIL3 and ...
Safe detection of mechanical and sensitive protective equipment ...
Description:
Safe detection of mechanical and sensitive protective equipment on an ASi network. Accepts two category 2 safety devices according to EN 954-1 or one category 4 device to EN954-1. If Category 4 is required, a two-channel input is available on ...