Allen Bradley Guardmaster 9357-DNET3M Connection Cable, For Use With DeviceNet

Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Smartguard 600, Safety Controller, Base Unit

Designed for applications that have traditionally fallen between safety relays and safety PLCs, the SmartGuard 600 is a general purpose programmable safety controller for safety applications that require some complex logic - allowing for more advanced safety functionality. It features 16 safety-rated inputs, 8 safety-rated outputs, 4 pulse test sources, and a DeviceNet connection that supports both standard and CIP Safety communication. Configuration and programming is accomplished through the built-in USB port.

Safety master on DeviceNet: you can use any Rockwell Automation Guard I/O to expand the number of safety devices the unit can control
It can also perform safety interlocking between a GuardLogix, GuardPLC or other SmartGuard safety controllers
Connections for DeviceNet and USB communications
The DeviceNet port supports both standard and CIP safety communication. CIP Safety is simply an extension of DeviceNet, other devices such as standard PLCs and HMIs can read data out of the SmartGuard 600 for system level interlocking, diagnostics and troubleshooting
Use RSNetWorx for DeviceNet (sold separately) to program the SmartGuard 600 and configure the DeviceNet network. Within RSNetWorx you can launch an editor that will allow you to write function block programs for the SmartGuard 600 and with ten safety application instructions plus another dozen logic and timing instructions, you can write powerful, yet simple safety control programs
Can be used in many safety applications including: E-stop; light curtain; safety gate; two hand control; Multi-zone control; Perimeter guarding

Standards

IEC61508 SIL3 and EN954-1 Cat.4

Approvals

c-UL-us, UL listed for Class 1 Division 2 Groups A, B, C, D Hazardous Locations; UL certified for Functional Safety. See UL File E256621; CE; C-Tick; TUV certified for functional safety up to SIL 3, Cat. 4; ODVA conformance tested to DeviceNet and DeviceNet Safety specifications

Specificaties
Kenmerk Waarde
Accessory Type Connection Cable
For Use With DeviceNet
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 26-05-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
1.456,00
(excl. BTW)
1.761,76
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.456,00
Related Products
For use with its B2900A precision source/measure units ...
Description:
For use with its B2900A precision source/measure units and other parametric instruments, Keysight introduced high current GNDU cable 1.5m long, 16493L-001 ( 888-2419 ) and 3m long, 16493L-002 ( 888-2428 ). This type of cable is used to connect a ...
Designed to transmit digital and analogue signals, and ...
Description:
Designed to transmit digital and analogue signals, and therefore ideal for use in very high-speed VDI (Voice - Data - Image) networks. Features and Benefits· Category 7A S/FTP cables assembled in pairs and general shielding· Individually shielded pairs · Low ...
The Telaris ProInstall Series have an IR (infrared) ...
Description:
The Telaris ProInstall Series have an IR (infrared) port which allows you to connect the tester to a computer and upload test data using a Amprobe PC software.This automates your troubleshooting or recording process, reduces the possibility of manual error ...
The OS32C is a compact and versatile safety ...
Description:
The OS32C is a compact and versatile safety laser scanner designed for easy handling and installation. The low profile and lightweight body allows installation in small spaces and the 270° detection angle provides coverage of two sides with just one ...