Phoenix Contact 2890425 Connector, For Use With PSR Downtime/Speed Monitors

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Multi-application Modular System - PSR Series

The PSR safety relays from Phoenix contacts can be quickly and reliably assembled to form a tailor-made safety solution.
To connect using TBUS correctly you will need one PSR-TBUS per module. For the last additional module use one PSR-TBUS-TP instead, this will close the feedback loop. The interface module is used for the connection of up to four safety sensors with NC/NO contacts to the safety relay PSR-SDC4, with screw connection.

Features and Benefits

• Quick system extension up to 10 modules, offering a safety system with up to 42 contacts
• Automatic identification of desired operating mode, no need to set switches or define parameters
• The system is based on a master relay (PSR-SDC) that monitors e-stops, guard doors (interlock or non-contact) and optical devices (e.g. light curtains)
• Safe cross-wiring with T-BUS renders the usual cross-wiring of supply voltage, enable signal and confirmation path redundant. Making commissioning and future expansion simple
• 24Vdc supply voltage
• Semiconductor output
• Depending on the wiring Safety category 2 or 4 can be maintained
• One or Two channel switches are used for control

Note

The device has a rear interface for the DIN Rail connector T-BUS. Via this T-BUS interface extension devices PSR-URM4-B (undelayed contacts) and PSR-URD (drop-out delay contacts) can be controlled and monitored over one channel. These in combination form a T-BUS unit, the feedback path must be connected to the final (right hand) extension device (see datasheet for more details) or by using connection plug PSR-TBUS-TP.

Specificaties
Kenmerk Waarde
Accessory Type Connector
For Use With PSR Downtime/Speed Monitors
Connector Type Straight Female
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
7,73
(excl. BTW)
9,35
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 7,73
5 - 9
€ 7,49
10 +
€ 7,40
Related Products
Phoenix Contact brings you the M12 series of ...
Description:
Phoenix Contact brings you the M12 series of SPEEDCON connector. The SPEEDCON connector offers you a faster locking-system, saving you on the amount of installation time. The SACC M12 series is flexible, robust and versatile and built to withstand unstable ...
From Phoenix Contact, the SPEEDCON M23 Connector combines ...
Description:
From Phoenix Contact, the SPEEDCON M23 Connector combines signal, data and power transference in a single contact. The compact M23 connector features SPEEDCON technology for fast and simple connection, and is an efficient solution for high power applications and signal ...
Electronic circuit protector type ESX10-T is designed to ...
Description:
Electronic circuit protector type ESX10-T is designed to ensure selective disconnection of DC24V load systems. By active current limitation, ESX10-T responds much faster to overload or short circuit conditions than switch-mode power supply. The ESX10-T limits the highest possible current ...
Non-contact actuationMagnetic coded sensingHigh tolerance to misalignmentLED indication2 ...
Description:
Non-contact actuationMagnetic coded sensingHigh tolerance to misalignmentLED indication2 N/C solid state relay outputs and 1 PNP auxiliary outputSwitching current: 200 mA @ 24VdcSupply Voltage: 24VdcIP 69K protection ratingCategory 1 device per EN 954-1, dual channel contacts suitable for Cat 3 ...