Siemens 3SE7920-1AB Eye Bolt, For Use With 3SE7 Rope Pull Switch, 3SF2 Rope Pull Switch

  • RS-stocknr. 749-7739
  • Fabrikantnummer 3SE7920-1AB
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

3SE7 Emergency Grab Wire Switch

The 3SE7 series of grab wire switches (trip wire switches, cable operated switches) are used for monitoring or for EMERGENCY STOP devices on particularly dangerous system sections.
As the effective range of a grab wire switch is only limited by the length of the grab wire, large systems can also be protected. Switches (requiring pulling at both ends) and conveyor belt unbalance trackers are used primarily for monitoring very long belt systems.

Design

The switches for wire lengths up to 50m are available with 1 NO + 1 NC or 2 NC contacts and for up to 75m with 1 NO + 3 NC contacts. The switches for wire lengths of 2 ´ 75m and the conveyor belt unbalance trackers are supplied with 2 NO + 2 NC contacts.
The grab wire switch and the conveyor belt unbalance tracker are also available with a factory fitted LED (red, 24 V DC). This light has innovative on board chip technology that allows the operating state of the switch to be visible at a distance of at least 50m.

Function

The NC contacts of the grab wire switch and the conveyor belt unbalance tracker are positive opening. The grab wire switches with one side operation are held in free position by the pre-tension on the turnbuckle. In the 3SE7 140 and 3SE7 150 grab wire switches, both switching contacts are available for wire-break/wire-pull signalling. The NO contact can be used, for example, for signalling purposes. On switches with interlocking, with a pre-tensioned wire, the locking must be deactivated beforehand in order to return the grab wire switch to its original position.

Positive latching and positive NC contacts
Switches for wire lengths up to 75m
Metal housing
Enclosure is screw mounted
IP65 rating
Operating temperature: -25 to +70°C

Note

Stock nos. 764-4341, 764-4301, 764-4304, 764-4357 are fitted with an indicator light.

Standards

The switches are equipped with positive latching and positive NC contacts and are therefore suitable for operation in EMERGENCY STOP devices in accordance with EN ISO 13850. They are usable up to Category 4 according to EN 954-1.

Approvals

UL,CSA

Specificaties
Kenmerk Waarde
Accessory Type Eye Bolt
For Use With 3SE7 Rope Pull Switch, 3SF2 Rope Pull Switch
Connector Size M8
55 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
10,00
(excl. BTW)
12,10
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 10,00
10 - 14
€ 9,59
15 +
€ 9,18
Related Products
The use of a turnbuckle and spring is ...
Description:
The use of a turnbuckle and spring is not suitable for emergency stop model type XY2-CH.Cable assembly kit includes: 1 x galvanised cable, Ø 3.2 mm.1 x cable clip XY2-CZ523; 1 x end spring XY2-CZ703.
Miniature tongue-operated safety interlock with 2 sets of ...
Description:
Miniature tongue-operated safety interlock with 2 sets of contacts, particularly useful for light duty sliding and small radii hinged machine guardsDual entry and rotatable head allows up to 8 options for actuator entry positionForced guided contacts - complies with EN ...
Our Lifeline™ 3 Cable Pull Switches are cable ...
Description:
Our Lifeline™ 3 Cable Pull Switches are cable (rope) operated emergency-stop devices.. The Lifeline 3 system can be installed along or around awkward machinery and provides a constant-access emergency-stop facility. Switches up to 30 m (98 ft) spanUniversal mounting and ...
Innovative rope tensioning system compatible with most rope ...
Description:
Innovative rope tensioning system compatible with most rope switchesEnables speedy installation of grab wire switchesRope tensioned by turning the setting bolt on the tensioner with a hexagon key.