Norton AVOS Back-Up Pad, 115mm diameter

  • RS-stocknr. 299-5679
  • Fabrikantnummer 07660705168
  • Fabrikant Norton
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

AVOS Backing Pad

AVOS angle grinder backing pad with M14 thread type specifically for use with 115mm angle grinders and AVOS abrasive discs
Unique triangular pad profile allows installation and removal of the pad from machines by hand without the use of a spanner, reducing changeover time
Spanner holes can be used if preferred

AVOS Grinding System

Warning

  • These grinding discs must be used with AVOS backing pads. They are not suitable for use with standard backing pads. Maximum operating speed 13000rpm.
Specificaties
Kenmerk Waarde
Series AVOS
Accessory Type Back-Up Pad
Diameter 115mm
10 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
11,16
(excl. BTW)
13,50
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 11,16
Related Products
Introducing the 3M™ Softback Sanding Sponge, this flexible ...
Description:
Introducing the 3M™ Softback Sanding Sponge, this flexible foam pad reaches tricky areas that are hard to reach. The sponges can be used either wet or dry when sanding on wood, fibreglass, metals and plastics. They are highly conformable to ...
Introducing the 3M™ Softback Sanding Sponge, this flexible ...
Description:
Introducing the 3M™ Softback Sanding Sponge, this flexible foam pad reaches tricky areas that are hard to reach. The sponges can be used either wet or dry when sanding on wood, fibreglass, metals and plastics. They are highly conformable to ...
Introducing the 3M™ Softback Sanding Sponge, this flexible ...
Description:
Introducing the 3M™ Softback Sanding Sponge, this flexible foam pad reaches tricky areas that are hard to reach. The sponges can be used either wet or dry when sanding on wood, fibreglass, metals and plastics. They are highly conformable to ...
A soft sponge coated on one side in ...
Description:
A soft sponge coated on one side in a Very Fine abrasive coating. Ideal for detail sanding and finishing work on wood due to the flexible nature of the sponge With little pressure the sponge will bend and flex making ...