Assemtech Reed Switch Rectangular 400V, NO, 500 mA

  • RS-stocknr. 866-2603
  • Fabrikantnummer MMPSA 240/30 LH NO BLUE
  • Fabrikant Assemtech
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Assemtech Rectangular Proximity Reed Switches

This range of rectangular magnetic proximity reed switches from Assemtech are designed to provide a simple and cost effective solution to position or limit sensing applications. Reed switches are often employed to carry out such functions as linear actuator switches, security system switches and door switches.

Moulded switch case with 2 slotted fixing holes
Robust sealed switch
Changeover version available

Specificaties
Kenmerk Waarde
Switch Shape Rectangular
Switch Type Magnetic Proximity
Pole and Throw Configuration SPST
Normal State Configuration NO
Terminal Type Wire Lead
Maximum Current 500 mA
Maximum AC Voltage 400V
Contact Resistance 150mΩ
Total Length 320mm
Length 14mm
Maximum Operating Temperature +85°C
Dimensions 14 x 20 x 6 mm
Width 20mm
Depth 6mm
Minimum Operating Temperature -20°C
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
137 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
4,64
(excl. BTW)
5,61
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 4,64
6 - 11
€ 4,46
12 +
€ 4,31
Related Products
The Following Wiring Information Relates to the C/O ...
Description:
The Following Wiring Information Relates to the C/O Switch (RS 339-752)Pre-wired with 0.7m PVC leadsBlue cast zinc case with slotted fixingBreakdown volts: 340ac/500dcRating IP64Dimensions: 80 x 19 x 9.6mm (switch) 38 x 25 x 9.6mm (magnet).
Assemtech moulded reed switches for PCB, suitable for ...
Description:
Assemtech moulded reed switches for PCB, suitable for many different applications such as position and limit sensing, linear actuators, consumer electronics activation and automated production lines. Available in two versions switching either 130Vac across N/C contacts, or 470Vac across N/O ...
Combined opening sensor (reed contact) for flush/surface mounting ...
Description:
Combined opening sensor (reed contact) for flush/surface mounting with NC or NO contactSuitable for private and commercial buildings with large switching distancesSuitable for all applications The contacts are suitable for both parallel and overhead mounting (magnet/contact).
Heavy duty NC door contactHighly robust aluminium design, ...
Description:
Heavy duty NC door contactHighly robust aluminium design, shatter proofFlexible mounting with large switching distance.