Legris High Pressure Ball Valve Brass 3/8 in G 2 Way

  • RS-stocknr. 231-5124
  • Fabrikantnummer 6402 10 17
  • Fabrikant Legris
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

Panel Mountable

Mountable in-line ball valve for closing fluid systems with a simple quarter turn of the handle

full flow
Optimum sealing due to compensating "O" rings
Excellent resistance to scaling due to ball seal configuration

//media.rs-online.com/t_line/L231511-01.gif

Ball Valve, Standard, Padlockable and Panel Mount

These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.

Specificaties
Kenmerk Waarde
Attachment Type Threaded
Threaded Connection 3/8 in G
Body Material Brass
Thread Size 3/8in
Safe for Use With Water
Maximum Working Pressure 40 bar
Connection Size mm 10mm
Connection Size inch 3/8in
Type 2 Way
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
17 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
41,74
(excl. BTW)
50,51
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 41,74
5 - 9
€ 40,46
10 +
€ 39,14
Related Products
A 2/2 way ball valve with a hand ...
Description:
A 2/2 way ball valve with a hand lever and female thread at both ends. Available in a range of thread sizes from G G1. Female thread with hand leverAir and water operating mediumsBrass housingLarge operating temperature range of -20 ...
The Georg Fischer Ball valve type 127 PVC-U ...
Description:
The Georg Fischer Ball valve type 127 PVC-U 100-230V , 25mm nominal size with manual emergency over ride With solvent cement sockets metric. It has fail safe return unit with battery and integrated manual emergency override. Voltage 100-230V, 50-60HzFactory set ...
These nickel plated brass ball valves have seals ...
Description:
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps ...
Brass sphere valves for water systems and water ...
Description:
Brass sphere valves for water systems and water distribution.Available with a flat red steel handle.