Legris Nickel Plated Brass Manual Ball Valve 1/2 in BSPP

  • RS-stocknr. 756-6825
  • Fabrikantnummer 0402 13 21
  • Fabrikant Legris
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

In-Line Ball Valve Double Female

The standard Legris ball valve provides a reliable means of opening and closing fluid systems. It requires a simple quarter turn of the handle to operate the two-way version

In-line ball valve for closing fluid systems with a simple quarter turn of the handle.
Full flow
Optimum sealing due to compensating "O" rings
Excellent resistance to scaling due to ball seal configuration
Maximum working pressure: 40 bar
Working temperature: -20 → 80 °C
Retaining nut: Nickel plated brass

Ball Valve, Standard, Padlockable and Panel Mount

These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.

Specificaties
Kenmerk Waarde
Attachment Type Threaded
Threaded Connection 1/2 in BSPP
Body Material Nickel Plated Brass
Thread Size 1/2in
Maximum Working Pressure 580 psi
3 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Box of 5
178,62
(excl. BTW)
216,13
(incl. BTW)
Box(es)
Per doos
Per stuk*
1 - 4
€ 178,62
€ 35,724
5 - 9
€ 173,14
€ 34,628
10 +
€ 167,55
€ 33,51
*prijsindicatie
Related Products
Designed for use with aggressive fluids in corrosive ...
Description:
Designed for use with aggressive fluids in corrosive environmentsSuited to higher pressure and temperature applicationsOne piece full bore constructionOperating Temperature to +200°C’O’ rings: Viton rubber.
S.100/101 reduced bore ball valves with either 'L' ...
Description:
S.100/101 reduced bore ball valves with either 'L' or 'T' port configuration. The valves are suitable for oil, air, water, saturated steam or high temperature hot water services in domestic, commercial and industrial applications. T-Port Configuration Valves are:• 486-243 - ...
A 2/2 way ball valve with a hand ...
Description:
A 2/2 way ball valve with a hand lever and female thread at both ends. Available in a range of thread sizes from G G1. Female thread with hand leverAir and water operating mediumsBrass housingLarge operating temperature range of -20 ...
This Sferaco angled washing machine ball valve with ...
Description:
This Sferaco angled washing machine ball valve with handle allows you to control the flow of water to your device. The valve has both male inlet connections, with the inlet being " (13 mm) and the outlet being " (19 ...