09-1461, Eurocard

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Vero’s Copper Stripboard

Vero’s brilliant copper stripboard will suit your purpose for doing simple prototyping work or for development circuitry. It is manufactured from a copper clad laminate board. It features pierced copper tracks and a base material of SRBP. Stripboards also give you brilliant access to solder your components with relative ease.

Features and benefits:

• Create a simple printed circuit with the copper strips forming the interconnections
• This stripboard can be cut into a smaller board
• Single sided copper
• Tracks are bonded to SRBP board and pierced to accept terminal pins.
• Board Size: 160x100x1.02mm
• Fibreglass material

Why a stripboard and not a breadboard?
Stripboards and breadboards are slightly different. A breadboard is for early stage prototyping where soldering is not required where as a stripboard can be used for soldering. Breadboards make great use for testing components and basic circuitry. With stripboards you can solder components and make it more of a permanent circuit over a breadboard.

Stripboard cutter: 543-535

DIN Type Matrixboard

Matrix boards with 1mm holes on a 2.54mm pitch.

Specificaties
Kenmerk Waarde
Length 100mm
Width 160mm
69 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
15,68
(excl. BTW)
18,97
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 15,68
5 - 9
€ 14,90
10 - 39
€ 14,12
40 +
€ 13,34
Related Products
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
Completely drilled boards, designed for the development of ...
Description:
Completely drilled boards, designed for the development of prototypes of analogue circuits.Thanks to the use of APW plugs, these cards are very versatile and allow discreet components to be connected wire-to-wire, or enable plugs and wrap pins to be fitted. ...
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
The Cif Athelec matrix board is 50mm long ...
Description:
The Cif Athelec matrix board is 50mm long and 100mm wide. It is a single-sided board with 1mm holes and 2.54mm pitch. • 15/10th tinned copper clad pads on CEM 1• A gap of 0.54mm on the whole surface• Copper ...