01-3936, Matrix Board FR2 with 58 x 42 1.3mm Holes, 2.54 x 2.54mm Pitch, 148.08 x 114.3 x 1.6mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Matrix Boards

These SRBP panels are pierced on a 0.1 in. grid to accept press-fit single-sided and double-sided pins.
They provide a quick means of circuit ’breadboarding'

Note

The colour of the base laminate may vary between batches, from straw colour to dark brown - this does not affect electrical and mechanical performance.

Note

This matrix board does not have copper tracks, only piercing through it.

Specificaties
Kenmerk Waarde
Hole Pitch 2.54 x 2.54mm
Dimensions 148.08 x 114.3 x 1.6mm
Length 148.08mm
Width 114.3mm
Thickness 1.6mm
Base Material Synthetic Resin Bonded Paper
Hole Diameter 1.3mm
FR Material Grade FR2
Hole Layout 58 x 42
45 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
212 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
5,36
(excl. BTW)
6,49
(incl. BTW)
Aantal stuks
Per stuk
1 - 49
€ 5,36
50 - 99
€ 5,10
100 - 249
€ 4,83
250 +
€ 4,56
Related Products
Prototyping boards manufactured from epoxy glass material to ...
Description:
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m (1 oz/ft). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 ...
Matrix boards with 1mm holes on a 2.54mm ...
Description:
Matrix boards with 1mm holes on a 2.54mm pitch. Recommended for wire-wrapping applicationsEpoxy glass - CEM 301.6mm thick, copper-cladSingle sidedHole pitch 2.54mm (0.1in)Hole dia 1.0mm.
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...