RE840-LF, Single Sided DIN 41612 C Matrix Board FR4 with 53 x 89 1mm Holes, 2.54 x 2.54mm Pitch, 233.4 x 160 x 1.5mm

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: PL
Productomschrijving

Matrixboards, DIN 41612//7 Type

Plated through holes (double sided 321//322 types)
Nominal thickness 1.5mm
Copper thickness 35μm
Hole Pitch 2.54mm (0.1 in)
Hole dia 1.0mm

DIN Type Matrixboard

Matrix boards with 1mm holes on a 2.54mm pitch.

Specificaties
Kenmerk Waarde
Number of Sides 1
Hole Pitch 2.54 x 2.54mm
Dimensions 233.4 x 160 x 1.5mm
Length 233.4mm
Width 160mm
Thickness 1.5mm
Base Material Epoxy Glass Fabric Laminate
Hole Diameter 1mm
FR Material Grade FR4
Hole Layout 53 x 89
Copper Thickness 35µm
Connection DIN 41612 C
25 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
23,86
(excl. BTW)
28,87
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 23,86
5 - 9
€ 23,80
10 +
€ 17,71
Related Products
This series of nut plates is designed to ...
Description:
This series of nut plates is designed to give technicians the ability to fine-tune the backplane to the requirements of their system. Each hole is a through-hole and the connector can be wired to series B as OV to prevent ...
Quadratic soldering islands reduce risk of lifting during ...
Description:
Quadratic soldering islands reduce risk of lifting during soldering. Simple connections to adjacent soldering islands can also be made. An earth screen on the component side provides maximum shielding. Plug connectors compliant with DIN 41612, types B and C up ...
Matrix boards with 1mm holes on a 2.54mm ...
Description:
Matrix boards with 1mm holes on a 2.54mm pitch. Nominal thickness 1.5mmCopper thickness 35μmHole pitch 2.54mm (0.1in)Hole dia 1.0mm.
Laboratory cards made from CEM3, 1.5 mmHot tin-plated ...
Description:
Laboratory cards made from CEM3, 1.5 mmHot tin-plated (HAL lead-free).