RE323-LF, Single Sided DIN 41612 D/E/F Matrix Board FR4 with 32 x 55 1mm Holes, 2.54 x 2.54mm Pitch, 160 x 100 x 1.5mm

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: PL
Productomschrijving

Laboratory cards for plug-in connectors, square soldering points

Laboratory cards made from FR2 laminated paper (HP) coated with solder mask or made from FR4 epoxy (LF), lead-free, tin-plated
Material thickness 1.5 mm
35 μm copper laminate
Hole pattern 2.54 ´ 2.54 mm
Soldering points 2 mm2; hole Ø 1 mm
Grid for different multiple contact strips complying with DIN 41612

DIN Type Matrixboard

Matrix boards with 1mm holes on a 2.54mm pitch.

Specificaties
Kenmerk Waarde
Number of Sides 1
Hole Pitch 2.54 x 2.54mm
Dimensions 160 x 100 x 1.5mm
Length 160mm
Width 100mm
Thickness 1.5mm
Base Material Epoxy Glass Fabric Laminate
Hole Diameter 1mm
FR Material Grade FR4
Hole Layout 32 x 55
Copper Thickness 35µm
Connection DIN 41612 D, DIN 41612 E, DIN 41612 F
53 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
6,90
(excl. BTW)
8,35
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 6,90
10 - 19
€ 6,56
20 - 49
€ 6,21
50 +
€ 5,86
Related Products
Prototyping boards manufactured from epoxy glass material to ...
Description:
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m (1 oz/ft). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 ...
Adaption circuit board for SOT23-8 with 0.65 mm ...
Description:
Adaption circuit board for SOT23-8 with 0.65 mm pitchEpoxy fibre-glass FR4 1.50 mmDouble-sided 35 μm CuPlated through holes (PTH)Surface chem. Ni/AuSolder stop maskHole spacing 2.54 mm & 1.27 mmShield pad.
Completely drilled boards, designed for the development of ...
Description:
Completely drilled boards, designed for the development of prototypes of analogue circuits.Thanks to the use of APW plugs, these cards are very versatile and allow discreet components to be connected wire-to-wire, or enable plugs and wrap pins to be fitted. ...
Quadratic soldering islands reduce risk of lifting during ...
Description:
Quadratic soldering islands reduce risk of lifting during soldering. Simple connections to adjacent soldering islands can also be made. An earth screen on the component side provides maximum shielding. Plug connectors compliant with DIN 41612, types B and C up ...