RE525-LF, Single Sided DIN 41612 D Matrix Board FR4 with 37 x 57 1mm Holes, 2.54 x 2.54mm Pitch, 160 x 100 x 1.5mm

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: PL
Productomschrijving

Matrixboards, DIN 41612//7 Type

Plated through holes (double sided 321//322 types)
Nominal thickness 1.5mm
Copper thickness 35μm
Hole Pitch 2.54mm (0.1 in)
Hole dia 1.0mm

DIN Type Matrixboard

Matrix boards with 1mm holes on a 2.54mm pitch.

Specificaties
Kenmerk Waarde
Number of Sides 1
Hole Pitch 2.54 x 2.54mm
Dimensions 160 x 100 x 1.5mm
Length 160mm
Width 100mm
Thickness 1.5mm
Base Material Epoxy Glass Fabric Laminate
Hole Diameter 1mm
FR Material Grade FR4
Hole Layout 37 x 57
Copper Thickness 35µm
Connection DIN 41612 D
9 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
5,52
(excl. BTW)
6,68
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 5,52
10 - 19
€ 5,25
20 - 49
€ 4,97
50 +
€ 4,69
Related Products
Double sided backplanes 3U high with pth for ...
Description:
Double sided backplanes 3U high with pth for high reliability which will accept DIN41612 connectors. Suitable for use with subracks to IEC297-3. 96//96-way suitable for high speed logic systems where screening is required between each signal line. Can also be ...
This series of nut plates is designed to ...
Description:
This series of nut plates is designed to give technicians the ability to fine-tune the backplane to the requirements of their system. Each hole is a through-hole and the connector can be wired to series B as OV to prevent ...
The Rotring A3 College Drawing Board is a ...
Description:
The Rotring A3 College Drawing Board is a portable, parallel rule, single locking, drafters' drawing board. Magnetic clamp with scaleStraight-edge guide slots on all four sides with signal humps.Parallel straight-edge with grip area and stop-and-go buttonAdditional metal clampFor sheet sizes ...
Veroboards brilliant copper stripboard will suit your purpose ...
Description:
Veroboards brilliant copper stripboard will suit your purpose for doing simple prototyping work or for development circuitry. It is manufactured from a copper clad laminate board. It features pierced copper tracks and a base material of SRBP. Stripboards also give ...