RE232-LF, Single Sided Matrix Board FR4 with 40 x 60 1.02mm Holes, 2.54 x 2.54mm Pitch, 165.1 x 114.3 x 1.6mm

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: AT
Productomschrijving

RE232-LF Laboratory Card for DIL ICs

Non-European Format
Size: 114.3 x 165.1 mm
Material thickness: 1.6 mm FR4
Copper coating 35 μm, hot dip tin-plated on soldering side only (HAL)
Component overlay on component side
Hole pattern: 2.54 x 2.54 mm (1//20")
40 x 60 bore hole rows
3-hole soldering islands
4 DIP IC rows, 7.62 mm sequence, 15.24 mm with 48 connections
Hole diameter: 1.02 mm
Max. Operating temperature: 150 °C

Specificaties
Kenmerk Waarde
Number of Sides 1
Hole Pitch 2.54 x 2.54mm
Dimensions 165.1 x 114.3 x 1.6mm
Length 165.1mm
Width 114.3mm
Thickness 1.6mm
Base Material Epoxy Glass Fabric Laminate
Hole Diameter 1.02mm
FR Material Grade FR4
Hole Layout 40 x 60
Copper Thickness 35µm
17 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
15,34
(excl. BTW)
18,56
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 15,34
5 - 9
€ 14,72
10 - 39
€ 14,32
40 +
€ 13,76
Related Products
Matrix boards with 1mm holes on a 2.54mm ...
Description:
Matrix boards with 1mm holes on a 2.54mm pitch. Recommended for wire-wrapping applicationsEpoxy glass - CEM 301.6mm thick, copper-cladSingle sidedHole pitch 2.54mm (0.1in)Hole dia 1.0mm.
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
Completely drilled boards, designed for the development of ...
Description:
Completely drilled boards, designed for the development of prototypes of analogue circuits.Thanks to the use of APW plugs, these cards are very versatile and allow discreet components to be connected wire-to-wire, or enable plugs and wrap pins to be fitted. ...
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...