RE210-S1, Single Sided Matrix Board with 38 x 61 1mm Holes, 2.54 x 2.54mm Pitch, 160 x 100 x 1.5mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: BE
Productomschrijving

RE210-S1 / S2 / S3 laboratory cards

Laboratory cards made from CEM3, 1.5 mm
Hot tin-plated (HAL lead-free)

DIN Type Matrixboard

Matrix boards with 1mm holes on a 2.54mm pitch.

Specificaties
Kenmerk Waarde
Number of Sides 1
Hole Pitch 2.54 x 2.54mm
Dimensions 160 x 100 x 1.5mm
Length 160mm
Width 100mm
Thickness 1.5mm
Base Material CEM3
Hole Diameter 1mm
Hole Layout 38 x 61
Copper Thickness 35µm
196 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
6,28
(excl. BTW)
7,60
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 6,28
10 - 19
€ 5,97
20 - 49
€ 5,66
50 +
€ 5,33
Related Products
Matrix boards with 1mm holes on a 2.54mm ...
Description:
Matrix boards with 1mm holes on a 2.54mm pitch. Recommended for wire-wrapping applicationsEpoxy glass - CEM 301.6mm thick, copper-cladSingle sidedHole pitch 2.54mm (0.1in)Hole dia 1.0mm.
A range of boards that is just as ...
Description:
A range of boards that is just as easy to use as the standard Veroboard, but which have a direct connector to provide a secure interface.
Quadratic soldering islands reduce risk of lifting during ...
Description:
Quadratic soldering islands reduce risk of lifting during soldering. Simple connections to adjacent soldering islands can also be made. An earth screen on the component side provides maximum shielding. Plug connectors compliant with DIN 41612, types B and C up ...
The Cif Athelec matrix board is 100mm long ...
Description:
The Cif Athelec matrix board is 100mm long and 160mm wide. It is a single-sided board with 1mm holes and 2.54mm pitch. • 15/10th tinned copper clad pads on CEM 1• A gap of 0.54mm on the whole surface• Copper ...