RE310-S1, Single Sided Matrix Board with 38 x 61 1mm Holes, 2.54 x 2.54mm Pitch, 160 x 100 x 1.5mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

RE310 Prototype Board, 3 Hole Pads

35 μm CU on one side
HAL hot dip tin-plated
CEM3 base material
Hole diameter: 1 mm
Connected in 3 hole pattern

DIN Type Matrixboard

Matrix boards with 1mm holes on a 2.54mm pitch.

Specificaties
Kenmerk Waarde
Number of Sides 1
Hole Pitch 2.54 x 2.54mm
Dimensions 160 x 100 x 1.5mm
Length 160mm
Width 100mm
Thickness 1.5mm
Base Material CEM3
Hole Diameter 1mm
Hole Layout 38 x 61
Copper Thickness 35µm
23 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
5,88
(excl. BTW)
7,11
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 5,88
10 - 19
€ 5,09
20 - 49
€ 4,93
50 +
€ 4,78
Related Products
The Rotring A3 College Drawing Board is a ...
Description:
The Rotring A3 College Drawing Board is a portable, parallel rule, single locking, drafters' drawing board. Magnetic clamp with scaleStraight-edge guide slots on all four sides with signal humps.Parallel straight-edge with grip area and stop-and-go buttonAdditional metal clampFor sheet sizes ...
A range of boards that is just as ...
Description:
A range of boards that is just as easy to use as the standard Veroboard, but which have a direct connector to provide a secure interface.
Single-sided copper-tin plated square pad cards.2.54 mm drilled ...
Description:
Single-sided copper-tin plated square pad cards.2.54 mm drilled pitch.Gap between tracks is 0.54 mm.Square pads 2 mm x 2 mm.
Matrix boards with 1mm holes on a 2.54mm ...
Description:
Matrix boards with 1mm holes on a 2.54mm pitch. Plated through holes (double sided 321//322 types)Nominal thickness 1.5mmCopper thickness 35μmHole Pitch 2.54mm (0.1 in)Hole dia 1.0mm.