RE013-LF, Single Sided Matrix Board FR4 with 51 x 52 0.45mm Holes, 1.27 x 1.27mm Pitch, 70.48 x 68.58 x 1.5mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Prototyping Boards, 1.27 mm Pitch

Prototyping board SMD
Epoxy fibre-glass 1.50 mm
Single-sided 35 μm Cu
Hot air leveling (HAL-Leadfree)
Solder stop mask
Hole spacing 1,27 x 1,27 mm

DIN Type Matrixboard

Matrix boards with 1mm holes on a 2.54mm pitch.

Specificaties
Kenmerk Waarde
Number of Sides 1
Hole Pitch 1.27 x 1.27mm
Dimensions 70.48 x 68.58 x 1.5mm
Length 70.48mm
Width 68.58mm
Thickness 1.5mm
Base Material Epoxy fibre-glass
Hole Diameter 0.45mm
FR Material Grade FR4
Hole Layout 51 x 52
Copper Thickness 35µm
Circuit Pattern One Side
102 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
4,73
(excl. BTW)
5,72
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 4,73
Related Products
Adaption circuit board for SOP32 with 1,27 mm ...
Description:
Adaption circuit board for SOP32 with 1,27 mm pitchEpoxy fibre-glass FR4 1.50 mmDouble-sided 35 μm CuPlated through holes (PTH)Surface chem. Ni/AuSolder stop maskHole spacing 2.54 mm & 1.27 mmSolder pads Ø 2.20 mmHole diameter Ø 1.10 mm and Ø 0.35 ...
Adaption circuit board for 40 Pin DIP 2.54 ...
Description:
Adaption circuit board for 40 Pin DIP 2.54 mm to DIP 1.27 mmEpoxy fibre-glass FR4 1.50 mmDouble-sided 35 μm CuPlated through holes (PTH)Surface chem. Ni/AuSolder stop maskFits on sockets with a distance of 15.24 mm.
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
The Cif Athelec matrix board is 50mm long ...
Description:
The Cif Athelec matrix board is 50mm long and 100mm wide. It is a single-sided board with 1mm holes and 2.54mm pitch. • 15/10th tinned copper clad pads on CEM 1• A gap of 0.54mm on the whole surface• Copper ...