JG Speedfit MDPE Pipe Fitting 15mm, 12 bar

  • RS-stocknr. 756-523
  • Fabrikantnummer TSM15N
  • Fabrikant JG Speedfit
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Pipe Inserts - Speedfit

Use on all Speedfit Barrier Pipe installations

Maximum working pressure: 12 bar @ 20°C, 6 bar @ 65°C and 3 bar @ 92°C

Max. Working Pressure: 12 Bar @ 20°C, 6 Bar @ 65°C, 3 Bar @ 92°C

Caution

DO NOT USE FOR: Gas, fuel oil or compressed air applications

Standards

BS EN ISO 9001: BS 7291 Parts 1 & 3 Class S

Approvals

Approved to WRC, BBA, PKM, PEM

Approvals

WRC; BBA; PKM; PEM

Standards

BS EN ISO 9001; BS 7291 Parts 1 & 3 Class S

SpeedFit Tube, Conduits & Tube Inserts

Pipe Suitability - Speedfit fittings can be used with: Copper pipe to BS2871 Part 1 / BSEN 1057: 1996, Speedfit cross linked polyethylene (PEX) Barrier Pipe to BS7291. Speedfit fittings cannot be used on stainless steel pipe.,Applications - Mains fed and indirect cold water systems, vented and unvented hot water systems and vented and sealed central heating systems.,Material - Polysulfone, Acetal

Specificaties
Kenmerk Waarde
Series Speedfit Pipe
Compatible Pipe Size 15mm
Maximum Working Pressure 12 bar
70 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
0,477
(excl. BTW)
0,577
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 40
€ 0,477
€ 4,77
50 - 90
€ 0,458
€ 4,58
100 - 240
€ 0,448
€ 4,48
250 +
€ 0,438
€ 4,38
*prijsindicatie
Related Products
The John Guest system of push-in fittings and ...
Description:
The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points. No need to prepare threaded ...
Speedfit® valves, connectors and couplers, made from Acetal ...
Description:
Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C. May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar ...
Speedfit® valves, connectors and couplers, made from Acetal ...
Description:
Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C. May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar ...
The John Guest system of push-in fittings and ...
Description:
The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points. No need to prepare threaded ...