Mechanical Counter Elesa CE.82199-rb, Revolution 5 digits Top Coming

  • RS-stocknr. 382-6546
  • Fabrikantnummer CE.82199-rb
  • Fabrikant Elesa
Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: IT
Productomschrijving

Mechanical Position Indicator

Mechanical devices for reading settings and outputs on machinery and equipment requiring adjustment by means of rotating shafts or lead screws.

Operating use:

To give an exact reading of distance moved by relating the reading of the indicator to the thread pitch of the shaft or lead screw (type dependant on pitch - see table).
To count the number of turns of a shaft (types 001.00 or 0001.0), allowing an operator to set a specific setting to perform a given function.

Fitting Instructions:

Drill 6mm by 10mm deep hole 22mm from centre of shaft to accept rear locating pin
Zero set shaft and indicator reading
Locate on shaft and tighten grub screw

Five digit counter with magnified lens
Clockwise shaft rotation
Impact resistant thermoplastic case
Ultrasonically welded to prevent tampering and dirt ingression
Rear brass bushing with double sealing to IP67
DD52R comprises of 37mm deep indicator and 14mm spacer

//media.rs-online.com/t_line/L382651-01.gif
//media.rs-online.com/t_line/L3826518-02.gif
Specificaties
Kenmerk Waarde
Motion Revolution
Number of Digits 5
Direction Of Rotation Top Coming
Shaft Speed Maximum 1000rpm
Drive Shaft Diameter 20mm
13 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
55,62
(excl. BTW)
67,30
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 55,62
Related Products
The Baumer mechanical stroke counter is a 5-digit, ...
Description:
The Baumer mechanical stroke counter is a 5-digit, manual reset and surface mount device. It has a pivoting control lever and automatic return. The count mode of 1 stroke is equal to 1digit/ drive.The counter has a maximum speed of ...
Totalising counter actuated by presence of a magnetic ...
Description:
Totalising counter actuated by presence of a magnetic fieldNo power supply requiredPolycarbonate housingCentre pole magnet with countersunk central fixing hole available separatelyMagnet stock no. 260-369, 20mm diameter, 10 mm heightSupplied with 3 types of mounting bracketsProvision for fitting a cable ...
DD51-E position indicators, with battery power supply, can ...
Description:
DD51-E position indicators, with battery power supply, can be used on passing through shafts in any position to provide the reading of the absolute or incremental positioning of a machine component.The 5-digit display of 8,0 mm height ensures excellent readability ...
For counting, plotting, checking, numbering people, cars, items, ...
Description:
For counting, plotting, checking, numbering people, cars, items, etc. in productionReset by knurled knob.Supplied with a ring for manual use.Supplied with clip-on base on the enclosure, for fitting the counter to a horizontal or vertical support bracket.