Mechanical Counter Trumeter 1-4635 5 digits Top Coming

  • RS-stocknr. 882-6995
  • Fabrikantnummer 1-4635
  • Fabrikant Trumeter
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MY
Productomschrijving

5 Figure Stroke Mechanical Counter

These 5 figure stroke counters from Trumeter are especially designed for limited space and high count life applications. The advanced drive system translates into exceptionally high operating speeds and extended operating life, for fast and accurate readings.

5 figures 5mm high
Standard reset knob
Top-coming rotation
Right-hand shaft extension (882-6995)
Left-hand shaft extension (882-6986)

Applications:

Copiers
Printing presses
Cut-off machines
Peice-part counting applications

Specificaties
Kenmerk Waarde
Number of Digits 5
Digit Height 5 mm
Reset Method Knob
Direction Of Rotation Top Coming
Shaft Speed Maximum 500Count/min
Drive Shaft Diameter 4mm
17 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
37,18
(excl. BTW)
44,99
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 37,18
5 - 9
€ 36,07
10 +
€ 34,57
Related Products
The Baumer mechanical stroke counter is a 5-digit, ...
Description:
The Baumer mechanical stroke counter is a 5-digit, manual reset and surface mount device. It has a pivoting control lever and automatic return. The count mode of 1 stroke is equal to 1digit/ drive.The counter has a maximum speed of ...
Models with stroke lever control.One stroke equals one ...
Description:
Models with stroke lever control.One stroke equals one number count.Pivoting control lever and automatic return. Ø 4 mm control shaft.Min. 38° and max. 60° stroke angle.Maximum of 500 strokes/minute.
Totalising counter actuated by presence of a magnetic ...
Description:
Totalising counter actuated by presence of a magnetic fieldNo power supply requiredPolycarbonate housingCentre pole magnet with countersunk central fixing hole available separatelyMagnet stock no. 260-369, 20mm diameter, 10 mm heightSupplied with 3 types of mounting bracketsProvision for fitting a cable ...
DD51-E position indicators, with battery power supply, can ...
Description:
DD51-E position indicators, with battery power supply, can be used on passing through shafts in any position to provide the reading of the absolute or incremental positioning of a machine component.The 5-digit display of 8,0 mm height ensures excellent readability ...