- RS-stocknr.:
- 828-1884
- Fabrikantnummer:
- DM3AT-SF-PEJM5
- Fabrikant:
- Hirose
9 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 2,56
(excl. BTW)
€ 3,10
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 2,56 |
5 - 24 | € 2,28 |
25 - 49 | € 2,04 |
50 - 99 | € 1,92 |
100 + | € 1,77 |
- RS-stocknr.:
- 828-1884
- Fabrikantnummer:
- DM3AT-SF-PEJM5
- Fabrikant:
- Hirose
Wetgeving en compliance
- Land van herkomst:
- CN
Productomschrijving
Hirose DM3 Series microSD Card Connectors
DM3 series SMT mounting microSD card connectors with small external dimensions and a strong rigid structure. These DM3 series microSD card connectors have reverse card insertion protection and a N/O card detection switch. The termination leads of these DM3 series microSD card connectors are accessible so they can be inspected and re-worked.
Small external dimensions
Strong, rigid construction
Reverse card insertion protection
4 connection points of the metal cover to the PCB secure connection of the ground circuit providing EMI protection
Normally Open card detection switch
Black LCP insulator, UL94V-0
Strong, rigid construction
Reverse card insertion protection
4 connection points of the metal cover to the PCB secure connection of the ground circuit providing EMI protection
Normally Open card detection switch
Black LCP insulator, UL94V-0
Note
DM3 AT* part numbers are Push-Push with an ejection mechanism and are Top board mounting (standard)
DM3 BT* part numbers are Push-Push with an ejection mechanism and are Bottom board mounting (reverse)
DM3 C & CS* part numbers are Hinge, Push-Pull with no ejection mechanism and are Top board mounting (standard)
DM3 D* part numbers are Push-Pull without an ejection mechanism and are Top board mounting (standard)
DM3xxx-SF-xxx part numbers have standard right angle SMT terminals
DM3xxx-DSF-xxx part numbers have reverse right angle SMT terminals
DM3 BT* part numbers are Push-Push with an ejection mechanism and are Bottom board mounting (reverse)
DM3 C & CS* part numbers are Hinge, Push-Pull with no ejection mechanism and are Top board mounting (standard)
DM3 D* part numbers are Push-Pull without an ejection mechanism and are Top board mounting (standard)
DM3xxx-SF-xxx part numbers have standard right angle SMT terminals
DM3xxx-DSF-xxx part numbers have reverse right angle SMT terminals
Memory Card Connectors
Specificaties
Kenmerk | Waarde |
---|---|
Card Type | MicroSD |
Gender | Female |
Number of Contacts | 8 |
Number of Rows | 1 |
Pitch | 1.1mm |
Body Orientation | Right Angle |
Mounting Type | Surface Mount |
Contact Material | Copper Alloy |
Contact Plating | Gold |
Termination Method | Solder |
Housing Material | Liquid Crystal Polymer |
Length | 15.95mm |
Width | 13.85mm |
Depth | 1.68mm |
Maximum Operating Temperature | +85°C |
Series | DM3 |
Dimensions | 15.95 x 13.85 x 1.68mm |
Minimum Operating Temperature | -25°C |