Hirose 8 Way Right Angle Micro SD Memory Card Connector With Solder Termination
- RS-stocknr.:
- 828-1884P
- Fabrikantnummer:
- DM3AT-SF-PEJM5
- Fabrikant:
- Hirose
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 22-07-2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk (geleverd op een rol) Quantities below 150 on continuous strip
€ 2,28
(excl. BTW)
€ 2,76
(incl. BTW)
| Aantal stuks | Per stuk |
| 5 - 24 | € 2,28 |
| 25 - 49 | € 2,04 |
| 50 - 99 | € 1,92 |
| 100 + | € 1,77 |
- RS-stocknr.:
- 828-1884P
- Fabrikantnummer:
- DM3AT-SF-PEJM5
- Fabrikant:
- Hirose
Wetgeving en compliance
- Land van herkomst:
- CN
Productomschrijving
Hirose DM3 Series microSD Card Connectors
DM3 series SMT mounting microSD card connectors with small external dimensions and a strong rigid structure. These DM3 series microSD card connectors have reverse card insertion protection and a N/O card detection switch. The termination leads of these DM3 series microSD card connectors are accessible so they can be inspected and re-worked.
• Small external dimensions
• Strong, rigid construction
• Reverse card insertion protection
• 4 connection points of the metal cover to the PCB secure connection of the ground circuit providing EMI protection
• Normally Open card detection switch
• Black LCP insulator, UL94V-0
• Strong, rigid construction
• Reverse card insertion protection
• 4 connection points of the metal cover to the PCB secure connection of the ground circuit providing EMI protection
• Normally Open card detection switch
• Black LCP insulator, UL94V-0
Note
DM3 AT* part numbers are Push-Push with an ejection mechanism and are Top board mounting (standard)
DM3 BT* part numbers are Push-Push with an ejection mechanism and are Bottom board mounting (reverse)
DM3 C & CS* part numbers are Hinge, Push-Pull with no ejection mechanism and are Top board mounting (standard)
DM3 D* part numbers are Push-Pull without an ejection mechanism and are Top board mounting (standard)
DM3xxx-SF-xxx part numbers have standard right angle SMT terminals
DM3xxx-DSF-xxx part numbers have reverse right angle SMT terminals
DM3 BT* part numbers are Push-Push with an ejection mechanism and are Bottom board mounting (reverse)
DM3 C & CS* part numbers are Hinge, Push-Pull with no ejection mechanism and are Top board mounting (standard)
DM3 D* part numbers are Push-Pull without an ejection mechanism and are Top board mounting (standard)
DM3xxx-SF-xxx part numbers have standard right angle SMT terminals
DM3xxx-DSF-xxx part numbers have reverse right angle SMT terminals
Memory Card Connectors
Specificaties
Kenmerk | Waarde |
|---|---|
| Card Type | MicroSD |
| Gender | Female |
| Number of Contacts | 8 |
| Number of Rows | 1 |
| Pitch | 1.1mm |
| Body Orientation | Right Angle |
| Mounting Type | Surface Mount |
| Contact Material | Copper Alloy |
| Contact Plating | Gold |
| Termination Method | Solder |
| Housing Material | Liquid Crystal Polymer |
| Length | 15.95mm |
| Width | 13.85mm |
| Depth | 1.68mm |
| Minimum Operating Temperature | -25°C |
| Maximum Operating Temperature | +85°C |
| Series | DM3 |
| Dimensions | 15.95 x 13.85 x 1.68mm |