Yamaichi 6 Way Right Angle SIM Card Connector With Solder Termination

  • RS-stocknr. 237-619
  • Fabrikantnummer FMS006Z-2000-0
  • Fabrikant Yamaichi
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

SIM Card Connector

SIM card connector in both cover types and push-push type versions

Conforms to GSM11.11 standard for the European mobile phone systems
Push-push types allow smooth extraction by push-in/push-out eject mechanism
Low profile cover version has one touch locking lid, which requires only one push for locking or release
Glass filled insulator, UL940V-0
Mating cycles 5000

Memory Card Connectors

Specificaties
Kenmerk Waarde
Card Type SIM
Gender Male
Number of Contacts 6
Number of Rows 2
Pitch 1.27mm
Body Orientation Right Angle
Mounting Type Surface Mount
Contact Plating Gold over Nickel
Termination Method Solder
Housing Material Liquid Crystal Polymer
Length 20.85mm
Width 2.4mm
Depth 26.5mm
Dimensions 20.85 x 2.4 x 26.5mm
Minimum Operating Temperature -55°C
Maximum Operating Temperature +85°C
13 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
7,60
(excl. BTW)
9,20
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 7,60
15 - 49
€ 7,33
50 - 99
€ 7,07
100 - 249
€ 6,80
250 +
€ 6,50
Related Products
Glenair micro D Pigtail single row connectors come ...
Description:
Glenair micro D Pigtail single row connectors come with 18 inch 10 colour repeating 26AWG Teflon® wire are manufactured in accordance to MIL-DTL-83513 and offer high performance and fully potted cables, excellent temperature resistance and durability in a smaller form ...
nano-SIM SMT mount memory card connector with a ...
Description:
nano-SIM SMT mount memory card connector with a bar-push, pin-eject design. This nano-SIM memory card socket connector features a card detection switch and an ejector button on the left hand side and is tray capable. Keying and PCB retention facilitate ...
Reverse bottom mount type SD memory card connector ...
Description:
Reverse bottom mount type SD memory card connector with push-push insertion and removal and a high speed data transfer rate. This SD memory card connector is right angle SMT mounting, has short hold-down board guides and half insertion indication. Typical ...
Designed to accept SD and MMC card typesAbsorbs ...
Description:
Designed to accept SD and MMC card typesAbsorbs excessive stress in the card insertion directionPrevents the card from being damaged in an attempt to remove forciblyAccidental card fall-out preventionSuitable for notebook PCs, digital cameras and PDAs.