- RS-stocknr.:
- 738-8818
- Fabrikantnummer:
- DM3BT-DSF-PEJS
- Fabrikant:
- Hirose
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
10 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Prijs Elk (in een pakket van 5)
€ 2,36
(excl. BTW)
€ 2,86
(incl. BTW)
Aantal stuks | Per stuk | Per pak* |
5 - 120 | € 2,36 | € 11,80 |
125 - 370 | € 2,124 | € 10,62 |
375 - 995 | € 1,886 | € 9,43 |
1000 - 1995 | € 1,656 | € 8,28 |
2000 + | € 1,534 | € 7,67 |
*prijsindicatie |
- RS-stocknr.:
- 738-8818
- Fabrikantnummer:
- DM3BT-DSF-PEJS
- Fabrikant:
- Hirose
Datasheets
Wetgeving en compliance
- Land van herkomst:
- CN
Productomschrijving
Hirose DM3 Series microSD Card Connectors
DM3 series SMT mounting microSD card connectors with small external dimensions and a strong rigid structure. These DM3 series microSD card connectors have reverse card insertion protection and a N/O card detection switch. The termination leads of these DM3 series microSD card connectors are accessible so they can be inspected and re-worked.
Small external dimensions
Strong, rigid construction
Reverse card insertion protection
4 connection points of the metal cover to the PCB secure connection of the ground circuit providing EMI protection
Normally Open card detection switch
Black LCP insulator, UL94V-0
Strong, rigid construction
Reverse card insertion protection
4 connection points of the metal cover to the PCB secure connection of the ground circuit providing EMI protection
Normally Open card detection switch
Black LCP insulator, UL94V-0
Note
DM3 AT* part numbers are Push-Push with an ejection mechanism and are Top board mounting (standard)
DM3 BT* part numbers are Push-Push with an ejection mechanism and are Bottom board mounting (reverse)
DM3 C & CS* part numbers are Hinge, Push-Pull with no ejection mechanism and are Top board mounting (standard)
DM3 D* part numbers are Push-Pull without an ejection mechanism and are Top board mounting (standard)
DM3xxx-SF-xxx part numbers have standard right angle SMT terminals
DM3xxx-DSF-xxx part numbers have reverse right angle SMT terminals
DM3 BT* part numbers are Push-Push with an ejection mechanism and are Bottom board mounting (reverse)
DM3 C & CS* part numbers are Hinge, Push-Pull with no ejection mechanism and are Top board mounting (standard)
DM3 D* part numbers are Push-Pull without an ejection mechanism and are Top board mounting (standard)
DM3xxx-SF-xxx part numbers have standard right angle SMT terminals
DM3xxx-DSF-xxx part numbers have reverse right angle SMT terminals
Memory Card Connectors
Specificaties
Kenmerk | Waarde |
---|---|
Card Type | MicroSD |
Gender | Female |
Number of Contacts | 8 |
Number of Rows | 1 |
Pitch | 1.1mm |
Body Orientation | Right Angle |
Mounting Type | Surface Mount |
Contact Material | Copper Alloy |
Contact Plating | Gold |
Termination Method | Solder |
Housing Material | Liquid Crystal Polymer |
Length | 13.85mm |
Width | 16.05mm |
Depth | 1.83mm |
Maximum Operating Temperature | +85°C |
Minimum Operating Temperature | -25°C |
Dimensions | 13.85 x 16.05 x 1.83mm |