150 W CDM-TD Clear Metal Halide Lamp, RX7s Tubular Enclosed Fitting, 13250 lm, 16000h

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Ceramic

These lamps are fully compatible with the traditional metal halide type, with the same physical dimensions, also using use the same control gear
The clear outer Quartz envelope is UV- block
Constant colour temperature maintained without the colour drift experienced by the traditional type
Improved colour rendering and light (lumen) output

Note

These lamps require 2 to 10 minutes to cool before re-striking, but shorter times are possible if installed in fittings with high voltage ignitor circuits.
Care must be taken NOT to touch the glass surface of the lamp during installation.

Metal Halide

These lamps produce a clear white light and are suitable for display or floodlighting, where the heat output from tungsten halogen lamps would create a problem. Metal Halide Lamps have an efficiency approx. 4 times higher than halogen lamps and xenon lamps. In addition, the short-arc type is similar to a point light source, making optical design easy. As their colour temperature characteristics are similar to daylight colour, exact colours (RGB) can be reproduced. They can also be used for both high bay and low bay applications.,Compared to High Pressure Mercury lamps, Metal Halide lamps offer greater efficiencies and, compared to high pressure sodium (SON) lamps, they have similar advantages, but have different output characteristics. A disadvantage of metal halide lamps, when compared to SON lamps, is that they have a shorter service life.

Specificaties
Kenmerk Waarde
Lamp Type CDM-TD
Wattage 150 W
Lamp Base RX7s
Lamp Shape Tubular
Fitting Type Enclosed
Mounting Orientation Horizontal
Internal Ignitor No
Length 137.43 mm
Colour Temperature 3000K
Lamp Finish Clear
Colour Rendering 88
Luminosity 13250 lm
Diameter 25mm
Life Hours 16000h
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 04-03-2020, met een levertijd van 1 werkdag.
Prijs Each
35,13
(excl. BTW)
42,51
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 35,13
Related Products
The XF Series of hazardous area Ex d ...
Description:
The XF Series of hazardous area Ex d Floodlight fitting from DTS has a robust design and is ideal for many hazardous areas, whether it is oil, gas or marine. The XF ATEX Floodlights come with a variety of fixings, ...
A compact metal halide lamp with integral reflector ...
Description:
A compact metal halide lamp with integral reflector for use in projection, fibre optic and architectural lighting applicationMinimal forward UV-radiation Excellent colour rendering: CRI = 96Long operating life.
Introducing the Ledvance Powerstar® HQI-T® 400 W metal ...
Description:
Introducing the Ledvance Powerstar® HQI-T® 400 W metal halide lamp, which produces a high lumen output of 32,000 lm. The clear tubular lamp has an E40 screw base, providing a quick fitment and replacement. Excellent colour rendering of 92 ensures ...
White-Lux Plus® metal halide lamps can be used ...
Description:
White-Lux Plus® metal halide lamps can be used to convert the yellow light of sodium lamps in existing SON ballasted installations to clean white metal halide light. Operate on standard HPS ballasts and ignitorsFormed body arc tube for fast startingOpen ...