Panasonic ZNR Series Metal Oxide Varistor 2.5A, Clamping 43V, Varistor 22V

  • RS-stocknr. 721-0052
  • Fabrikantnummer ERZVF2M220
  • Fabrikant Panasonic
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

Metal Oxide Varistors ZNR Series SMD

Panasonic VF surge absorbers are designed for flow and reflow soldering. These surge absorbers feature low clamping voltage and large withstanding surge current capability. VF surge absorbers are part of the Zinc-oxide Non-Linear Resistor (ZNR) range. Saving cost and board space, they can perform the same function as two back to back zener diodes and a parallel connected capacitor.

Compact size
Surface mount
Protective coating

Applications

Typical applications include the absorption of switching surge from relays and protection of consumer and industrial equipment. These surge absorbers can be used to protect communication modules such as terminal adopters, modems and xDSL technology.

Standards

PCQC (GB/T10193, GB/T10194)

Specificaties
Kenmerk Waarde
Varistor Voltage 22V
Maximum AC Voltage Rating 14V
Maximum DC Voltage Rating 18V
Clamping Voltage 43V
Clamping Current 2.5A
Energy 0.9J
Series ZNR
Maximum Surge Current 125A
Length 8mm
Depth 6mm
25 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
1,402
(excl. BTW)
1,696
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
€ 1,402
€ 7,01
25 - 95
€ 1,234
€ 6,17
100 - 245
€ 1,078
€ 5,39
250 - 495
€ 1,01
€ 5,05
500 +
€ 0,952
€ 4,76
*prijsindicatie
Verpakkingsopties
Related Products
High power metal oxide varistors suitable for reducing ...
Description:
High power metal oxide varistors suitable for reducing transient voltage spikes in industrial power applications. Single and two-hole fixing types for distribution bus-bar mountingInsulated plastic case types for flat surface mountingHigh-mass large-diameter zinc oxide elementRepeatable protection against ...
Multilayer semi-conducting ceramic construction providing bi-directional voltage clamping. ...
Description:
Multilayer semi-conducting ceramic construction providing bi-directional voltage clamping. Suppression of inductive switching or other fast electrical transient events makes these devices useful in helping to achieve electromagnetic compliance of end products. Suitable for on-board transient voltage protection of ...
Standard radial epoxy-coated MOV with tinned-copper leads. Tinned ...
Description:
Standard radial epoxy-coated MOV with tinned-copper leads. Tinned copper wire leads with a ceramic body coated with epoxy resinRated for surge current (8//20 μs) and for energy (2ms).
VDR resistors, or varistors, are semiconductor resistors whose ...
Description:
VDR resistors, or varistors, are semiconductor resistors whose conductivity at a given temperature increases with voltage.Has a wide variety of applications, the most common including: clipping, relay coil contact protection, voltage stabilisation.