Littelfuse ZA Series Metal Oxide Varistor 18nF 20A, Clamping 43V, Varistor 19.2 → 26V

  • RS-stocknr. 760-6927
  • Fabrikantnummer V24ZA50P
  • Fabrikant Littelfuse
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Littelfuse Metal Oxide Varistors - LA / MA / ZA Series

Littelfuse metal oxide varistors are compact and versatile, and can be used within a wide range of applications.

The LA series of MOV’s are radial-lead varistors that are designed to be operated continuously across AC power lines.

The MA series of MOV’s are axial-lead varistors that are designed for use in a wide variety of board level industrial and commercial electronic equipment, protecting components and signal/data lines from low energy transients.

The ZA series of MOV’s are radial-lead varistors that are designed for use in the protection of low and medium-voltage circuits and systems. Typical applications include motor control, telecom, automotive systems, solenoid, and power supply circuits to protect circuit board components and maintain data integrity.

Specificaties
Kenmerk Waarde
Varistor Voltage 19.2 → 26V
Maximum AC Voltage Rating 14V
Maximum DC Voltage Rating 18V
Clamping Voltage 43V
Clamping Current 20A
Energy 100J
Series ZA
Diameter 23mm
Maximum Surge Current 2000A
Capacitance 18nF
Thickness 5mm
Dimensions 23 (Dia.) x 5mm
Lead Pitch 8.5mm
200 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
0,852
(excl. BTW)
1,031
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
€ 0,852
€ 4,26
25 - 45
€ 0,668
€ 3,34
50 - 120
€ 0,59
€ 2,95
125 - 245
€ 0,512
€ 2,56
250 +
€ 0,506
€ 2,53
*prijsindicatie
Related Products
Multilayer semi-conducting ceramic construction providing bi-directional voltage clamping. ...
Description:
Multilayer semi-conducting ceramic construction providing bi-directional voltage clamping. Suppression of inductive switching or other fast electrical transient events makes these devices useful in helping to achieve electromagnetic compliance of end products. Suitable for on-board transient voltage protection of ...
“ZNR” Transient/Surge Absorber, Series E-S1, improves E series ...
Description:
“ZNR” Transient/Surge Absorber, Series E-S1, improves E series products with high capability for absorbing transient overvoltage in a compact size, suitable for surge protection at high temperature. Large withstanding surge current capability in compact sizesWithstanding surge current at max. 125 ...
Standard radial epoxy-coated MOV with tinned-copper leads. Tinned ...
Description:
Standard radial epoxy-coated MOV with tinned-copper leads. Tinned copper wire leads with a ceramic body coated with epoxy resinRated for surge current (8//20 μs) and for energy (2ms).
Almost no energy consumption in stand-by modeAfter a ...
Description:
Almost no energy consumption in stand-by modeAfter a surge impulse the varistor works immediately in normal mode so there is no slip currentExcellent absorption at surge impulsesOperating temperature:–40 ºC to +85 ºC for types up to 95 VRMS–40 ºC to ...