Microchip ATSAMA5D27-SOM1, ARM Cortex A5 Microprocessor SAMA5D2 RISC 500MHz 176-Pin Module

  • RS-stocknr. 168-2814
  • Fabrikantnummer ATSAMA5D27-SOM1
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

The ATSAMA5D27-SOM1, which contains the ARM® Cortex®-A5 ATSAMA5D27C-D1G-CU System in Package (SiP), greatly simplifies design by integrating the power management, non-volatile boot memory, Ethernet PHY and high-speed lower power DDR2 memory onto a small, single-sided Printed Circuit Board (PCB). The SAMA5D27-SOM1 is built on a common set of proven Microchip components and limits the design rules of the main application board, reducing overall PCB complexity and cost. You can solder the SOM on a mother board and take it to production, or it can be used as a reference design along with the free schematics, design and Gerber files and complete bill of materials which are available online. You can also transition from the SOM to the SiP or the SAMA5D2 MPU itself, depending on your design needs.

- SAMA5D27 ARM Cortex-A5 processor
- 1GB (128MB) DDR2 DRAM
- On-board power management unit
- Single 3.3V supply
- Pre-programmed EUI-48 MAC address
- Industrial temperature range (-40 to 85°C)
- 40 x 38 mm Module, 0.8 mm pitch

Specificaties
Kenmerk Waarde
Family Name SAMA5D2
Device Core ARM Cortex A5
Instruction Set Architecture RISC
Maximum Frequency 500MHz
Mounting Type Surface Mount
Package Type Module
Pin Count 176
Typical Operating Supply Voltage 3.3 V
Dimensions 40.1 x 38.1 x 1.55mm
Height 1.55mm
Length 40.1mm
Width 38.1mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
23 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
35,06
(excl. BTW)
42,42
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 35,06
10 - 24
€ 32,29
25 - 99
€ 31,68
100 +
€ 30,17
Verpakkingsopties
Related Products
The MCP2200 Breakout Module allows for the evaluation ...
Description:
The MCP2200 Breakout Module allows for the evaluation and development of the MCP2200 serial converter. Dual In-Line Package (DIP) Form Factor BoardUART Tx and Rx signalsUART RTS and CTS signals8 General Purpose (GP) linesUser selectable power supply of 3.3 V ...
Barth professional range of STG-800 CAN Mini-PLC with ...
Description:
Barth professional range of STG-800 CAN Mini-PLC with a powerful 32-bit ARM Cortex core. The STG-800 Mini-PLC features a rugged CAN/CANopen interface with intuitive graphical programming capability. These Mini-PLC’s provide hardware-oriented microcontroller programming at lowest current consumption in a small ...
Vybrid devices are ideal for applications including simple ...
Description:
Vybrid devices are ideal for applications including simple HMI in appliances and industrial machines, secure control of infrastructure and manufacturing equipment, energy conversion applications such as motor drives and power inverters, ruggedized wired and wireless connectivity, and control of mobile ...
The Trenz electronic is an FPGA module integrating ...
Description:
The Trenz electronic is an FPGA module integrating a Xilinx Artix-7 100T FPGA, 32Mb Quad SPI flash memory for configuration and operation. It has powerful switch-mode power supplies for all on-board voltages. The rugged high-speed stacking strips provide a large ...