RS PRO Steel 30 Teeth Bevel Gear, 45° Pitch , 20° Angle , 15mm Bore

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CN
Productomschrijving

Metric Bevel Gears Steel

A range of steel bevel gears.

Made from S45C induction hardened steel with a chemi-black finish
Tensile strength (min) 569 N/mm²
20° pressure angle

Note

All mitre gears are supplied as single units (i.e. not as a pair).

//media.rs-online.com/t_line/L745163-01.gif
Specificaties
Kenmerk Waarde
Module 2.5
Material Steel
Gear Type Bevel
Number of Teeth 30
Nominal Gear Ratio 2:1
Pitch 45°
Pressure Angle 20°
Bore 16mm
10 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
47,63
(excl. BTW)
57,63
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 47,63
5 - 9
€ 46,16
10 +
€ 44,66
Related Products
Injection moulded acetal co-polymer mitre gears giving a ...
Description:
Injection moulded acetal co-polymer mitre gears giving a gear ratio of 1:1. Tensile strength 94N/mm2Hardness (Rockwell R) 110-120Pitch angle 45°, pressure angle 49° 48'Number of teeth 20.
Injection moulded acetal co-polymer bevel gears. Tensile strength ...
Description:
Injection moulded acetal co-polymer bevel gears. Tensile strength 75N/mm2Hardness (Rockwell R) 110-120Pitch angle 63° 26' (gear) 26° 34' (pinion)Face angle 65° 36' (gear) 30° 29' (pinion).
Injection moulded acetal copolymer spur gears providing a ...
Description:
Injection moulded acetal copolymer spur gears providing a wide range of gear ratios. Tensile strength 94N/mm2Hardness (Rockwell R) 110-12020° Pressure angle.
Worm gears and pinion gears designed to produce ...
Description:
Worm gears and pinion gears designed to produce large speed reduction ratios, especially in low loading applications. Available in modules 0.8 and 1.0. Both the pinion gear and worm gear module number / number of starts must match to ensure ...