Analog Devices AD5700-1BCPZ-R5, Modem HART FSK Modem FSK, 1.71 → 5.5 V, 24-Pin, LFCSP

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

HART Modems, Analog Devices

A range of modem (Modulator-Demodulator) devices which conform to the HART (Highway Addressable Remote Transducer) industrial communications protocol. HART communications frequently utilize 4-20mA networks and are widely used in Automation and Control applications. The HART standard provides for both point-to-point (analogue or digital) and multi-drop (digital only) modes of operation, the latter using a fixed loop current of 4mA.

HART Modem Communications

A range of devices which conform to the HART (Highway Addressable Remote Transducer) industrial communications protocol. HART communications frequently utilize 4-20mA networks and are widely used in Automation and Control applications. The HART standard provides for both point-to-point (analogue or digital) and multi-drop (digital only) modes of operation, the latter using a fixed loop current of 4mA.

Specificaties
Kenmerk Waarde
Modem Type HART FSK Modem
Modulation Technique FSK
Transmission Media Type Wire
Power Supply Type Single
Typical Operating Supply Voltage 1.71 → 5.5 V
Mounting Type Surface Mount
Package Type LFCSP
Pin Count 24
Dimensions 4.1 x 4.1 x 0.75mm
Height 0.75mm
Length 4.1mm
Maximum Operating Temperature +125 °C
Width 4.1mm
Minimum Operating Temperature -40 °C
25 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
317 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
10,53
(excl. BTW)
12,74
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 10,53
5 - 24
€ 10,00
25 - 124
€ 7,78
125 - 249
€ 6,75
250 +
€ 6,41
Verpakkingsopties
Related Products
The EVAL-CN0290-SDPZ, from Analog Devices, is an evaluation ...
Description:
The EVAL-CN0290-SDPZ, from Analog Devices, is an evaluation board for the CN0290 circuit. The EVAL-CN0290-SDPZ is designed to extend the minimum reference and minimum output frequency of a phase locked loop (PLL). The board is programmable using the ADF4106 Integer-N ...
The Instrumentation Amplifier ICs amplify the difference between ...
Description:
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals ...
The Instrumentation Amplifier ICs amplify the difference between ...
Description:
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals ...
Description:
The ADM3065E is a 3.0 V to 5.5 V, IEC electrostatic discharge (ESD) protected RS-485 transceiver, allowing the device to withstand ±12 kV contact discharges on the transceiver bus pins without latch-up or damage. The ADM3066E features a VIO logic ...